Instrukcja obsługi Yorkville Paraline PSA2S

Yorkville głośnik Paraline PSA2S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yorkville Paraline PSA2S (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 3.5 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/8

Owner’s Manual

Manuel de L’Utilisateur

PSA2

A2s

Congratulations on your purchase of the PSA2s.

The PSA2s is a premium-quality integrated

subwoofer and power ampliﬁer. It has been

designed to be the perfect complement to our

Paraline Series PSA1 powered speaker.

The line-level position is for use when the PSA2s

is fed a signal from a processor, electronic crossover, the

output of an un-powered mixer, or the loop-through of a powered

speaker cabinet. When using the line-level mode, the use of balanced

¼-inch (Tip, Ring, Sleeve) and/or XLR cables will reduce the unit’s sensitivity

to hum and buzz.

The speaker level position should be used when the PSA2s is fed with a ¼-inch speaker cable

from the output of an ampliﬁer or a powered-mixer, or from the parallel connection on an un-powered

speaker cabinet. For speaker level operation, connect the PSA2s just like an ordinary speaker (in paral-

lel using the loop-through jacks) along with the passive full-range loudspeakers.

The PSA2s may be plugged in before or after the full-range loudspeaker. The PSA2s does not alter

the signal to the daisy-chained (thru) loudspeakers and will not draw any power from the host ampliﬁer/

processor driving them. Also, note that an external crossover is not necessary when using the PSA2s.

At high power levels when the limiter is operating, increasing the subwoofer level control will not

increase the output. For the best results, set the system so that the limiter LED occasionally (a few

times per second) lights up. The limiter is present in the circuit at all times to prevent distortion and

to prevent over-excursion of the speakers.

Note: The PSA2s’ built-in stand mounting adapter can be used with the Yorkville SW-TUBEHD

accessory to support either one or two of our PSA1 cabinets. The support tube can be used safely

as long as the PSA2s is on a ﬂat, level surface.

WARNING: Larger or heavier cabinets should NOT be used!

Specifications

Model PSA2s

System Type Active Bass Reflex Subwoofer

Program Power (watts) 2400W program (4800W peak)

Max SPL (dB) 134 Peak / 131 contnuous

Frequency Response (Hz +/- 3db) 30 – 100

Crossover Frequency (Hz) Fixed @ 100Hz

Driver Configuration 2 x 15-inch

LF Driver(s) 2 x 15-inch Ceramic Woofers w/ 3-inch voice coils

LF Impedance (ohms) 2x 8 ohms

LF Amplifier Type Class-D

Power Consumption (typ/max) 660VA/900VA (5.5A/7.7A@120V, 2.9A/3.9A@230V)

Enclosure Materials 15mm Birch

Baffle Materials 15mm Birch

Covering / Finish Urethane Paint (Black)

Dimensions (DWH xbackW, inches) 23.75 x 18 x 38

Dimensions (DWH xbackW, cm) 60.3 x 45.7 x 96.5

Weight (lbs/kg) 156/70.76

*specifications subject to change without notice

PSA2

A2s

Specyfikacje produktu

Marka:	Yorkville
Kategoria:	głośnik
Model:	Paraline PSA2S
Kolor produktu:	Czarny
Impedancja:	16 Ω
Kraj pochodzenia:	Kanada
Klasa wzmacniacza:	D
Materiały:	Brzoza
Moc RMS głośnika niskotonowego:	2400 W
Pasmo przenoszenia subwoofera:	30 - 100 Hz
Czułość głośnika niskotonowego:	134 dB
Typ głośnika niskotonowego:	Subwoofer aktywny
Szerokość głośnika niskotonowego:	457 mm
Głebokość głośnika niskotonowego:	603 mm
Wysokość głośnika niskotonowego:	965 mm
Ciężar głośnika niskotonowego:	70760 g
Moc szczytowa subwoofera:	4800 W