Instrukcja obsługi Yorkville YXL10P

Yorkville głośnik YXL10P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yorkville YXL10P (15 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.7 gwiazdek

Pobierz PDF

Strona 1/15

YXL SERIES

YXL10P

YXL12P

YXL15P

BI-AMP POWERED

LOUDSPEAKER

ENCLOSURES

OWNER'S MANUAL

MANUEL DE L'UTILISTEUR

YXL SERIES

The YXL Series o󰀨ers our best ratio of power, performance and value for full-range active

loudspeaker enclosures. Providing 500 watts (1000 watts peak) with e󰀩cient speaker

components, the YXL Series is extremely loud for their sizes. There are several di󰀨erent input

options for connecting audio sources including Bluetooth , microphones, musical instruments ®

and other audio sources. While the onboard audio mixer may has a minimum of controls, it's

tremendously useful and provides great versatility. The YXL Series can be easily used in any

situation, close to walls, oors, in arrays with multiple enclosures and as a stage monitor. With all

these options, the YXL Series is the solution for all of your audio applications.

Up to 16 YXL Series Powered speakers can be linked together with a maximum of three

‘mixers’ active at any one time. This means up to 6 mic sources and 6 instrument/line sources

are available in an array of three or more enclosures. The Master level controls are used to

adjust the levels of individual powered enclosures. This is invaluable in applications where large

numbers of enclosures are used such as in clusters or in trade show applications (or when YXL

Series powered speakers are used as repeater enclosures or side-ll).

NOTE: Our Link system allows additional powered YXL Series powered speakers to be driven

from a single source (up to a maximum of 16 YXL Series powered enclosures). A maximum of

3 mixers can be used when Linking YXL Series powered enclosures

USER TIP: When a pair of YXL Series powered speakers are Linked you can use both mixers

integrated on each cabinet.

A 100 Hz high pass lter can be activated to make it easier to add subwoofers to the YXL-

Series powered enclosures. This allows the speakers to be used more e󰀩ciently with almost

any active subwoofer.

• 1000 watts (peak) 500 watts (program)

• Superior DSP processing with component protection

• 10, 12 or 15-inch woofers with 2-inch voice coils

• 1-inch HF compression drivers

• 90° x 60° HF dispersion Horns

• Dual purpose full-range and wedge monitor speaker

• Ultra-clear reproduction throughout the whole audio bandwidth

• Lightweight and high e󰀩ciency bi-amped power module

• Low distortion and high power-handling 10, 12 and 15-inch woofers

• Recessed control panel

• Master Level control with Activity indicator (cabinet level adjustment)

• 3 Performance modes, Concert, Club and Monitor

• Defeatable 3 channel mixer with level controls and Clip indicators

• Bluetooth input / streaming, not a󰀨ected by Mixer Defeat®

• 2 Microphone Inputs with level control and phantom power

• 1/4-inch TRS Instrument and Line Inputs

• 1/8-inch Aux Input for connecting mono or stereo audio sources

• An XLR Main In and Link output for easy connection and looping

• Selectable Sub lter (HPF) for connecting a subwoofer

• ABS / Polypropylene cabinet construction

• Tough, full length metal grille

YXL SERIES

The AC power switch on the rear panel turns

the power On or O󰀨. The Mode LED turns on to

indicate power is supplied to the unit.

The Mode Selector applies specic EQ and

tone settings for the YXL Series powered

enclosure, e󰀨ectively custom tailoring the

speaker for any environment.

Concert: Allows instruments and vocals to

be equally and naturally reproduced which

is best for live performance.

Club: Boosted bass and enhanced highs

make this mode ideal for music playback.

Monitor: Optimized for use as a stage

monitor and the human voice while

minimizing feedback.

The Master control sets the level of ALL sound

coming out of the YXL Series enclosure. If there

are multiple YXL Series speakers in a system,

the volume of each speaker is individually set by

using each enclosure’s Master control.

This LED illuminates when audio signal is present from all sources being sent to the Master.

NOTE: If the Master is turned to Min, the Activity LED will not illuminate.

The Yorkville YXL Series is capable of receiving streaming audio over Bluetooth® from devices

such as smart phones, tablets and laptops. Pairing your device with the YXL Series is simple and

gives you the freedom to play your music wirelessly.

To pair your Bluetooth® device, depress the Bluetooth® switch for approximately 4-seconds. The

blue LED will ash to indicate the YXL speaker is ready to be paired.

Bluetooth® can be used along with the Link feature only when the rst cabinet in the Link chain is

paired and the mixer is enabled. Pair with the rst cabinet using Bluetooth® and leave the others

unpaired. Then, use the appropriate XLR cables to Link between the multiple cabinets by wire

through the Link/left channel connection. If Stereo Bluetooth is desired, set the “paired” cabinet ®

to Stereo Mode, the right channel will play on the paired cabinet and the Left signal will play on the

cabinet connected to the L/Link jack.

The Mixer Enable switch turns the onboard mixer ‘on’ or ‘o󰀨.’ When the Mic or Line inputs are

used, this switch must be set to the ‘on’ position. If these inputs are not being used, the mixer

should be turned ‘o󰀨,’ this will help prevent the mixer from contributing noise to the system.

The onboard mixer should not be used when a source other than another YXL Series powered

speaker (or similar) is connected to the LINK jack. Remember, a maximum of 3 mixers, in a

chain of enclosures, should be used! A much larger number of enclosures may be used with

the mixers disabled on the additional enclosures.

Clip Activity

M AS TE R

1Clip 2Clip 3

Aux InInstrument Line

Mic

Pairing: Hold

for 4 sec,

then release

Mixer Enable

100 Hz

L I N K

MA I N I n

Sub

I NO U TI NO U T

Mode

Stereo/Mono

Concert

Club

Monitor

Mic 9 0 Hz

Specyfikacje produktu

Marka:	Yorkville
Kategoria:	głośnik
Model:	YXL10P
Kolor produktu:	Czarny
Materiał obudowy:	Polipropylen (PP)
Wbudowany wyłącznik:	Tak
Wysokość produktu:	520 mm
Szerokość produktu:	335 mm
Głębokość produktu:	280 mm
Waga produktu:	14000 g
Ilość na paczkę:	1 szt.
Rekomendowane użycie:	Scena
Technologia łączności:	Przewodowa
Bluetooth:	Tak
Moc wyjściowa (RMS):	500 W
Kanały wyjścia audio:	3.0 kan.
Wejście XLR:	Tak
Klasa wzmacniacza:	A/B
Stosunek sygnału do szumu:	126 dB
Zasięg częstotliwości:	43 - 16000 Hz
Głośnik niskotonowy:	Tak
Złącze 3,5 mm:	Tak
Moc szczytowa (PMPO):	100 W
Typ głośnika:	2-drożny
Średnica głośnika niskotonowego (imperial):	10 "