Instrukcja obsługi ZKTeco AQD-L100
ZKTeco
Niesklasyfikowane
AQD-L100
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZKTeco AQD-L100 (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 11 użytkowników na średnio 4.8 gwiazdek
Strona 1/1
Product Specications
Product Description
Display method: Common Screen display
Atmospheric pressure: 86Kpa to 106Kpa
Detection method for CO2: Infrared (NDIR)
Sampling time: 1.5 seconds
Product Size: 190*80*52mm
Detection temperature: -10°C to 50°C
Relative humidity: 20% to 85%
Storage temperature: -10°C to 60°C
Concentration unit for CO2: PPM
Power source: Lithium battery with 3000 mAh capacity;
5V DC power charging via micro USB port
This product is an air quality monitor that detects Carbon
dioxide (CO2), Temperature, and Humidity. it combines
sensors real-time monitoring of Carbon dioxide (CO2),
temperature, and humidity on its display.
Considerations Instructions
Please read the instructions carefully before using this
device.
Please let the device work short mins outdoors before
use for most accurate results.
Please keep the manual handy for quick reference and
troubleshooting.
When you long-press the power button, the air quality
monitor will boot up.
1. Power button, long press to turn on/o, 2 times-click to
enter time setting.
2. Right button, Single click to switch Celsius and
Fahrenheit.
3. Left button, long-press to turn on/o Alarm soud.
(when turn on alarm function, it would beep sound
once CO2 value more than 1000PPM)
4. USB charging port.
Time setting
In the power-on state, short press 2 times power button
to enter the Date and time mode;
click the left or right buttons to adjust the Years;
then click the power button to switch to Months,
click the left or right buttons to adjust the Months;
then click the power button to switch to days,
click the left or right buttons to adjust the days;
then click the power button to switch to Hours,
click the left or right buttons to adjust the hours;
then click the power button to switch to minutes,
click the left or right buttons to adjust the minutes;
then click the power button to switch to seconds,
click the left or right buttons to adjust the seconds.
After adjustment well, click the power button to conrm
and complete the time setting.
Precautions
Avoid covering the air intake areas during use to avoid
inaccurate measurements.
Avoid use of solvents to clean the product as residual
fumes will skew air quality readings.
Avoid water or other liquids near the product to avoid
electrical damage.
Do not allow unauthorized modication or repair of this
product.
Features
- Common Screen display
- Test variables: Carbon dioxide (CO2), temperature, humidity
- Large 3000mAh capacity Lithium battery
- 5V Micro USB charging
- Low battery warning
1. Start Up
2 3 4 5 6
3. Parameters
Product List
Air Quality monitor x 1
Micro USB charging cable x 1
Product Manual x 1
CO2 technical indicators
Measuring range: 400 to 5000PPM
Sensor for CO2: Infrared (NDIR)
Resolution: 1 PPM
Measuring range: -10 to 50°C
Measurement accuracy: ±1°C
Humidity range: 20% to 85% RH
Measurement accuracy: ±4% RH
Temperature and humidity technical indicators
When low battery icon is displayed, the device needs to
be charged. Insert the included or another compatible
micro USB charging cable into the device. Attach the
other end to a USB DC charger (such as a smart phone
charger) that outputs DC 5V at >=1000mA. Fully charge
for at least 2-3 hours before use. Avoid charging with a
USB computer port which only outputs 500mA.
2. About Charging
Product Key Function Description
Version: 1.0
User Manual
Air Quality Detector AQD-L100
Copyright © 2021 ZKTECO CO., LTD. All Rights Reserved.
Ctra. Fuencarral 44. Edicio 1, Planta 2.
28108 Alcobendas, Madrid. Spain
Phone: +34 916 532 891
Mail: sales@zkteco.eu
www.zkteco.eu
Specyfikacje produktu
| Marka: | ZKTeco |
| Kategoria: | Niesklasyfikowane |
| Model: | AQD-L100 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ZKTeco AQD-L100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane ZKTeco
7 Października 2024
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
Instrukcje Niesklasyfikowane
- Rossi
- Reflexion
- Moki
- Ebro
- GoGen
- EBS
- Bright Spark
- Procare
- BRIO
- Apricorn
- Excalibur
- Chuango
- Uplink
- EarthQuaker Devices
- JL Audio
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025