Instrukcja obsługi Acti PMAX-1105

Acti nieskategoryzowany PMAX-1105

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acti PMAX-1105 (25 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/25

Indoor Zoom Box

Mounting the Wall on

using an Indoor Bracket

Installation Guide

For Models:

B2x, I2x

2014/11/11

www.acti.com

Installation Guide

Table of Contents

Before Installation 3...................................................

Connecting a Power Adapter (Optional) .................................................. 3

Connecting the DI/DO and Audio Devices (Optional) ............................. 5

How to Connect DI/DO Devices .............................................................. 5

How to Connect Audio Devices ............................................................... 8

Connecting a Serial Device (Optional) ..................................................... 9

Indoor Installation Procedures ............................ 11

Step 1: Mount the Indoor Bracket ........................................................... 11

Step 2: Attach the Camera to the Bracket ............................................. 12

Step 3: Connect the Cable(s) .................................................................. 14

Step 4: Access the Camera Live View .................................................... 15

Other Accessories ................................................ 16

How to Install / Remove the Memory Card ............................................ 16

How to Insert the Memory Card ............................................................ 16

How to Remove the Memory Card ........................................................ 16

Accessing the Camera ......................................... 17

Congure the IP Addresses .................................................................... 17

Access the Camera .................................................................................. 21

Safety Information ................................................ 23

www.acti.com

Installation Guide

Before Installation

This section describes the procedures in preparing the external devices that you can connect to

the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO), Audio

Input and Output devices, as well as Serial Devices like a Pan-Tilt (PT) Scanner using the

bundled terminal blocks. The use of these devices, however, is optional.

Connecting a Power Adapter (Optional)

In case of using a non-PoE switch or your PoE switch has limited power supply, you can

purchase a power adapter and directly connect the camera to a power outlet. The power adapter

must be connected to the supplied terminal block before use.

To do this, follow the procedures below:

1. Loosen the screws of the and pins of the power terminal block. 12V GND

2. Take note that a standard power adapter cable has two (2) dierent wires:

White stripe: Connects 12V Pin to

Connects to GND Pin

Specyfikacje produktu

Marka:	Acti
Kategoria:	nieskategoryzowany
Model:	PMAX-1105
Kolor produktu:	Biały
Materiał obudowy:	Plastik
Wysokość produktu:	186.5 mm
Szerokość produktu:	76 mm
Głębokość produktu:	72 mm
Szerokość opakowania:	180 mm
Wysokość opakowania:	78 mm
Głębokość opakowania:	80 mm
Przeznaczenie:	Wewnętrzna
Model:	Oprawa
Maksymalna waga:	- kg