Instrukcja obsługi APC NetBotz AP9335TH

APC Niesklasyfikowane NetBotz AP9335TH

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC NetBotz AP9335TH (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Temperature/Humidity Sensor
(AP9335TH) Installation Instructions
Inventory
Installation
Note: If you use a tie wrap to secure the sensor, tighten the tie wrap over the recessed
channel on the sensor. If you use the housing clip, make sure the protrusions on the inside
of the clip snap into the slots in the recessed channel.
Note: Use adhesive cable tie holders, tie wraps, and wire clips to secure the sensor cable.
4-m (13.12-ft) temperature/humidity
sensor (1)
25.4-mm x 25.4-mm
(1-in x 1-in) temperature/
humidity sensor mount (1)
Housing clip (1)
203-mm (8-in) tie wrap (5) #8 x 3/4-in sheet
metal screw (1)
#8 wall anchor (1)
19-mm x 19-mm (3/4-in x 3/4-in) adhesive
cable tie holder (2)
Wire clip (6)
Customer support and warranty information is available at the APC Web site, www.apc.com.
© 2008 American Power Conversion. All rights reserved. All APC trademarks are property of
American Power Conversion. Other trademarks are property of their respective owners.
990-3506
11/2008
*990-3506*
Vertical rail
Door
Wall
Note: Drill a 4.76-mm (3/16-in) pilot hole for the wall anchor.


Specyfikacje produktu

Marka: APC
Kategoria: Niesklasyfikowane
Model: NetBotz AP9335TH

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z APC NetBotz AP9335TH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą