Instrukcja obsługi Arecont Vision D4SO-AV3115
Arecont Vision
kamera bezpieczeństwa
D4SO-AV3115
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Arecont Vision D4SO-AV3115 (19 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 5.0 gwiazdek
Strona 1/19

Arecont Vision D4SO Outdoor Dome Series Installation Manual
0 | Page

Arecont Vision D4SO Outdoor Dome Series Installation Manual
1 | Page
D4SO Outdoor Dome Installation Manual
A. Arecont Vision D4SO Dome Camera
Inside the box:
B. Mounting template
C. Security L-key
D. One double sided hex key
E. One single sided hex key
F. 6-position external power & IO plug
G. Pack of four (4) wood screws and four (4)
dry wall anchors
• #1 Phillips head screw driver
Not included but needed:
• #2 Phillips head screw driver
• Small Flat Head screw driver
Image 1
Mounting the Camera:
1. Remove camera and hardware from the
box.
2. Using the Mounting Template, prepare
the mounting provisions for camera
installation. NOTE: the 19.5mm diameter
hole on the Mounting template is where
the Ethernet cable will be exiting the
D4SO, align accordingly. If using the
side conduit hole, please see step 7
below.
3. Using Security L-key, loosen the four (4)
screws securing the dome cover (Image
2). Remove vandal resistant dome
cover. NOTE: Do not remove screws
from the dome cover.
Image 2
G
F
E
C
A
D
B

Arecont Vision D4SO Outdoor Dome Series Installation Manual
2 | Page
4. Run Ethernet cable through the hole on the
bottom of D4SO and plug it into the RJ45 port
on Arecont Vision’s compact MegaVideo
®
camera. (Image 3) . NOTE: If the camera will
be powered via PoE, please skip to step 5.
Image 3
5. If the camera is powered by an outside power
supply, run power wires through the hole and
connect power wires to appropriate contacts
of 6-postion connector using small flat screw
driver and connect 6-position plug to camera
as shown in Image 4-1.
Note: Please make sure the polarity of the
AC/DC input on the camera match the way
wires are installed in connector shown in
Image 4-2.
Image 4-1
Image 4-2
6. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood screws or any optional
hardware suitable for the mounting surface.
Specyfikacje produktu
Marka: | Arecont Vision |
Kategoria: | kamera bezpieczeństwa |
Model: | D4SO-AV3115 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Arecont Vision D4SO-AV3115, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kamera bezpieczeństwa Arecont Vision
3 Lutego 2025
3 Lutego 2025
3 Lutego 2025
3 Lutego 2025
3 Lutego 2025
3 Lutego 2025
3 Lutego 2025
3 Lutego 2025
3 Lutego 2025
3 Lutego 2025
Instrukcje kamera bezpieczeństwa
- kamera bezpieczeństwa Smartwares
- kamera bezpieczeństwa Grandstream
- kamera bezpieczeństwa Iget
- kamera bezpieczeństwa Eminent
- kamera bezpieczeństwa Duramaxx
- kamera bezpieczeństwa LevelOne
- kamera bezpieczeństwa Thomson
- kamera bezpieczeństwa British Telecom
- kamera bezpieczeństwa Canon
- kamera bezpieczeństwa Moog
- kamera bezpieczeństwa Edimax
- kamera bezpieczeństwa UniView
- kamera bezpieczeństwa Sricam
- kamera bezpieczeństwa Philips
- kamera bezpieczeństwa Strong
Najnowsze instrukcje dla kamera bezpieczeństwa
9 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025