Instrukcja obsługi Atdec TH-3060-UT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atdec TH-3060-UT (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 9 użytkowników na średnio 4.4 gwiazdek

Note:

Use a stud finder to accurately locate the centre of

the stud. Ensure that all screws fix securely into the stud.

TH-3060-UT

Component Checklist

Wall Plate

Right Mounting

Bracket

IMPORTANT INFORMATION

! IMPORTANT - Install 3060 Wall Mount as per Installation Instructions.

! This product supports a maximum load of 50kg (110lbs).

! This product only supports displays with mounting hole configurations from 100mm wide x 100mm

high up to 600mm wide x 400mm high.

! The manufacturer does not accept responsibility for incorrect installation.

! Before installing this product, please check the display ventilation requirements with your

LED/LCD manufacturer.

Step 1. Check Components

Step 2. Mounting the Wall Plate

Tools Required:

Power Drill

•

5mm (”) drill bit

•

Phillips Head screwdriver •

10mm

( ”)

masonry drill bit

•

10mm

( ”)

Socket Wrench or Shifter•

Tip: Use the built-in spirit level to ensure wall plate is horizontal

Masonry Wall

Timber Stud

Check you have received all parts against the Component Checklist and Hardware above.

Left Mounting

Bracket

Timber Stud

Wall Plate

Coach Screw

OR

Nylon Anchor

Coach Screw

Wall Plate

M6 Washer

Flat screen wall mount | Tilt

10mm

( ”)

hole

depth: 55mm (2.2”)

5mm

( ”)

hole

depth: 55mm (2.2”)

M6 Washer

End Cap (x2)

End Cap

End Cap

0.2

0.2

0.39

0.39

0.39

Display Mounting

Screws

Hardware

Nylon Anchor (x4)

M6 Washer (x4)

M5/M6 Spacer (x4)

M8 Spacer (x4)

Coach Screw (x4)

Multi-washer (x4)

M4x16/25/30mm (x4 each)

M5x14mm (x4 each)

M6x14/30mm (x4 each)

M8x 20/30mm (x4 each)

Installation Instructions

Specyfikacje produktu