Instrukcja obsługi Atdec VF-AT-AA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atdec VF-AT-AA (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 6 użytkowników na średnio 4.0 gwiazdek

Articulated Arm

UP

M4x10mm

(4x)

M4x12mm

(4x)

M4x16mm

(4x)

Display Mounting

Screws

Hand Grip

Primary Arm

Cable Cover

Secondary Arm

Cable Cover

Hardware

Pole Top Cap

Pole of the existing Visidec

Focus Product

A. Slightly insert Articulated Arm.

D. Twist and lock the

Hand Grip.

Pole

Articulated Arm

Lip of the Pole

Hand Grip tab

Installation Instructions

VF-AT-AA

Component Checklist

IMPORTANT:

The "User Operating

Card" must be left with

Visidec Focus Articulated

Arm once installed.

IMPORTANT INFORMATION:

Step 1. Check Components

Check you have received all parts against the Component Checklist and Hardware above.

Step 2. Remove Top Cap

Step 3. Attached Articulated Arm to the Existing Visidec Focus Product

B. Hold Articulated Arm at the lip

of

the pole and insert Hand Grip tab

in

the Articulated Arm.

Ensure the tab lines up with the slot

in the Pole.

C. Slide down Articulated

Arm with Hand Grip to

the desired position.

! IMPORTANT - Install Visidec Focus Accessory Arm as per Installation Instructions.

! This product is designed to be installed onto an existing Visidec Focus pole mount.

! This products supports displays with a maximum weight of 8kg (17½ lbs), and VESA mounting hole configurations:

75 x 75mm (3" x 3"), 100 x 100mm (4" x 4").

! The manufacturer accepts no responsibility for incorrect installation.

Focus Accessory Arm

Note: DO NOT

OVER TIGHTEN

Specyfikacje produktu