Instrukcja obsługi Audio-Technica AT2010
Audio-Technica
mikrofon
AT2010
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AT2010 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 11 użytkowników na średnio 4.6 gwiazdek
Strona 1/2
20 series studio/live sound microphones
AT2010
Cardioid Condenser Handheld Microphone
Features
• Studio-quality sound on stage for crystal-clear vocal performance
• Same 16 mm low-mass diaphragm found in the critically
acclaimed AT2020 side-address studio microphone
• Extended frequency response and superior transient response for
smooth, natural sonic characteristics
• High SPL-handling and wide dynamic range provide unmatched
versatility
• Cardioid polar pattern reduces pickup of sounds from the sides
and rear, improving isolation of desired sound source
• Multi-stage grille design offers excellent protection against
plosives and sibilance without compromising high-frequency
clarity
• Rugged all-metal design and construction for years of trouble-
free use
• Corrosion-resistant contacts from gold-plated XLRM-type
connector
• Quiet-Flex™ stand clamp provides silent, exible microphone
positioning
Description
The AT2010 is a handheld condenser microphone with a cardioid polar
pattern. It is designed specically for close-up vocal use in professional
live-sound and studio applications.
The microphone requires 48V phantom power for operation.
The cardioid polar pattern of the microphone is more sensitive to sound
originating directly in front of the element, making it useful for controlling
feedback, reducing pickup of unwanted sounds and providing isolation
between performers.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is enclosed in a rugged housing. Its multi-stage grille
design offers excellent protection against plosives and sibilance without
compromising high-frequency clarity. The included AT8470 Quiet-Flex
™
stand clamp permits mounting on any microphone stand with 5/8"-27
threads. A soft protective pouch is also included.
Operation and Maintenance
The AT2010 requires 48V phantom power for operation.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
When using the microphone in settings with a stage monitor speaker, the
speaker should be located 180° off axis (at rear of the microphone). This
placement, in conjunction with the microphone’s uniform cardioid pickup
pattern, will virtually eliminate the possibility of undesired audio feedback.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for long periods of time. Extremely
high humidity should also be avoided.
Specyfikacje produktu
| Marka: | Audio-Technica |
| Kategoria: | mikrofon |
| Model: | AT2010 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Audio-Technica AT2010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Audio-Technica
1 Marca 2025
13 Stycznia 2025
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
Instrukcje mikrofon
- DPA
- Vtech
- Manta
- IMG Stage Line
- PureLink
- Anywhere Cart
- Harley Benton
- Senal
- Phonic
- QTX
- Eurosound
- American DJ
- CKMOVA
- Proel
- Canon
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025