Instrukcja obsługi AXESS 99-3028S
AXESS
Niesklasyfikowane
99-3028S
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AXESS 99-3028S (40 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.1 gwiazdek
Strona 1/40

I N S TA L L AT I O N I N S T R U C T I O N S
99-3028S
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 1/30/23 INST99-3028S
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted silver to match the factory finish
• Repurposes the factory climate knobs for a factory look and feel
• Includes an Axxess interface, wiring harness, and antenna adapter
KIT COMPONENTS
• A) Radio trim panel (with preassembled circuit board) • B) Radio brackets
• C) Pocket • D) #4 x 3/8” Phillips pan-head screws (8)
• E) #8 x 3/8” Phillips truss-head screws (4) • F) Axxess interface and wiring (not shown) • G) Antenna adapter (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips #1 screwdriver
• Phillips #2 screwdriver • 9/32” socket wrench
• T-20 Torx screwdriver • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation ................................................... 4-7
Kit Assembly
–ISO DIN radio provision with pocket ..................8
–ISO DDIN radio provision .....................................8
Axxess Interface Installation ............................9-19
Final Assembly ......................................................15
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface included
Antenna Adapter: Included with kit
Steering wheel control interface: Included with kit
Backup camera retention: BACKUPCAM-2 (sold sep.)
Personalization Menu LCD: AX-LCD (sold sep.)
A B C D E
Chevrolet Camaro 2010-2015
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications

386.257.1187
|
MetraOnline.com
2
For vehicles without UMQ gauge panel,
unsnap and remove shifter trim panel
and skip to step 8.
1. Unclip and remove the (2) side trim
panels running the length of the center
console. (Figure A)
2. Remove (1) Phillips screw from each
side of the front of the center console.
(Figure B)
3. Remove (2) Phillips screws per side
from the cover on the back of the center
console then unclip and remove the
cover. (Figure C)
(Figure D)(Figure A)
(Figure E)(Figure B)
(Figure F)(Figure C)
2
19
180
3
30
0
30
70 9
12
19
180
200
320
300
30
100
0
30
70 9
12
19
180
200
320
30
100
DASH DISASSEMBLY
4. Remove (2) Phillips screws exposed
under the cover on the back of console.
(Figure D)
5. Remove gauge cluster/trim panel
around shifter. (Figure E)
6. Auto transmission vehicles only:
Remove one T-20 Torx screw from the
front of the shifter, and then remove
the knob and shifter surround panel.
(Figure F)
Continue onto next page

REV. 1/30/23 INST99-3028S 3
(Figure G) (Figure H) (Figure I)
DASH DISASSEMBLY (CONT.)
7. Remove (4) Phillips screws now
exposed, and then lift up on the rear
of the center console. Slide toward
the back of the vehicle then unclip
and remove the entire center console.
(Figure G)
8. Remove (2) 9/32” screws securing the
climate control/radio trim panel and
remove. (Figure H)
9. Remove (4) 9/32” screws securing the
radio chassis, and then remove.
(Figure I)
Continue to Kit Preparation
Specyfikacje produktu
Marka: | AXESS |
Kategoria: | Niesklasyfikowane |
Model: | 99-3028S |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z AXESS 99-3028S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane AXESS
28 Stycznia 2025
28 Stycznia 2025
10 Stycznia 2025
28 Grudnia 2024
28 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
9 Października 2024
8 Października 2024
8 Października 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Gardena
- Niesklasyfikowane Rommer
- Niesklasyfikowane Staudte-Hirsch
- Niesklasyfikowane Iluv
- Niesklasyfikowane Elsner
- Niesklasyfikowane Maxsa
- Niesklasyfikowane Platinet
- Niesklasyfikowane GMW
- Niesklasyfikowane Eico
- Niesklasyfikowane Industrial Music Electronics
- Niesklasyfikowane EtiamPro
- Niesklasyfikowane Diamex
- Niesklasyfikowane KONFTEL
- Niesklasyfikowane Tecnoinox
- Niesklasyfikowane Sharper Image
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025