Instrukcja obsługi AXESS AXTC-TY1
AXESS
Niesklasyfikowane
AXTC-TY1
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AXESS AXTC-TY1 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.8 gwiazdek
Strona 1/6
AXTC-TY1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 1/10/25 INSTAXTC-TY1
INTERFACE FEATURES
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape
• Wire cutter
• Zip ties
TABLE OF CONTENTS
Vehicle Applications 2 ..............................................
Interface Connections............................................3
Programming 4 .........................................................
Troubleshooting.....................................................5
Steering Wheel Control and Data Interface
Fits Lexus/Toyota 2002-2019
INTERFACE COMPONENTS
• AXTC-TY1 interface
• LD-SWCX-TY1 harness
• 3.5mm adapter
Product Info
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
Visit for more detailed information about the product and up-to-AxxessInterfaces.com
date vehicle specific applications.
www.MetraOnline.com
MetraOnline.com may be used
to assist with dash assembly
instructions. Simply enter your
Year, Make, Model vehicle into the
Vehicle Fit Guide and look for the
Dash Kit Installation Instructions.
• Designed for amplified and non-amplified models
• Provides accessory power (12-volt 10-amp)
• Provides NAV outputs (illumination, parking brake, reverse,
speed sense)
• Retains audio controls on the steering wheel and allows dual
assigning of steering wheel control buttons
• Designed to be compatible with all major radio brands
• Auto detects vehicle type, radio connection, and preset controls
• Retains memory settings even after battery disconnection or
interface removal (non-volatile memory)
• Retains balance and fade (excludes amplified models)
• Retains the 3.5mm AUX-IN jack
• Micro “B” USB updatable
2
APPLICATIONS
LEXUS
ES Series 2007-2012 ........................................................................
ES Series (w/ multi disc) 2002-2006 .............................................
IS Series 2002-2005 ........................................................................
RX Series 2004-2008 .......................................................................
TOYOTA
4-Runner 2003-2019 .......................................................................
Avalon 2011-2018 ..............................................................................
(Camry) Solara 2004-2008 ............................................................
Camry (w/o nav) 2012-2013 ...........................................................
Camry.............................................................................2007-2017
Corolla 2003-2018 ............................................................................
FJ Cruiser......................................................................... 2011-2014
Highlander 2008-2019 .....................................................................
Matrix 2005-2012 .............................................................................
Prius/Prius V (NAV) 2013-2016 .......................................................
Prius 3rd Gen (w/o nav) 2012-2015 ................................................
Plug-In (PHV) (w/o nav) 2012-2015 ...............................................
Prius 2004-2011 ...............................................................................
Rav-4 2004-2018 .............................................................................
Sequoia 2005-2019 ..........................................................................
Sienna 2004-2017 ............................................................................
Tacoma 2005-2019 ..........................................................................
Tundra 2006-2019 ............................................................................
Tundra (Double Cab) 2004-2005 ...................................................
Venza (w/ SD card based nav) 2013-2014 .....................................
Venza 2009-2016 .............................................................................
VEHICLE APPLICATIONS
3
REV. 1/10/25 INSTAXTC-TY1
3
INTERFACE CONNECTIONS
Front
Rear
Sub
AUX-IN
Rear View
SWC
Aftermarket Radio
(Your radio’s features may vary)
*BACK*
LD-SWCX-TY1
Green - Rear left speaker + output
Green/Black - Rear left - speaker output
Green/Purple - Reverse Signal
Light Green - Parking brake
Orange - Illumination
Purple - Rear right + speaker output
Purple/Black - Rear right - output
Gray - Front right + speaker
Gray/Black - Front right - speaker
White - Front left + speaker
White/Black - Front left - speaker
For models , remove voltage limiter extensions NON-AMPLIFIED ONLY
from the & Wire(s). GREY, GREY/BLACK, WHITE WHITE/BLACK
Blue -Antenna turn on
Blue/Pink - VSS/Speed-Sense
Red - Accessory power
Yellow - Battery wire
Black - Ground wire
Black/White - Shield GND
20-Pin
Vehicle Connectors
Radio Connections
Interface
LED Light
Reset Button
Note: The 2’ long harness with a 24-pin
connector is a service harness for setting
the clock with the factory radio. Run this
harness to a location where it can be easily
accessed, yet hidden.
3.5mm Adapter (for vehicles with Steering wheel
controls or aftermarket radios with a wire for SWC)
Boss (with SWC wire): Key 1 (Gray) - Brown
Kenwood / JVC (with SWC wire): Blue/Yellow - Brown
XITE: SWC-2 - Brown
Key-A or SWC-1 - Brown
Key-B or SWC-2 - Brown/White
* After programming, assign SWC buttons within radio menu
Universal
Radio*
{
3.5mm Adapter for Vehicles without Steering wheel controls
1)
From the , tie the and wires together with3.5mm adapter Brown Brown/White
tape or connector
2)
Connect the to the 3.5mm jack from the 3.5mm adapter LD- WCX-TY1 HarnessS
3) AXTC-TY1 Program the per the instructions on page 4. Disregard steps 4 & 5.
Specyfikacje produktu
| Marka: | AXESS |
| Kategoria: | Niesklasyfikowane |
| Model: | AXTC-TY1 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z AXESS AXTC-TY1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane AXESS
28 Stycznia 2025
28 Stycznia 2025
10 Stycznia 2025
28 Grudnia 2024
28 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
9 Października 2024
8 Października 2024
8 Października 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Kolcraft
- Niesklasyfikowane Lenoxx
- Niesklasyfikowane Elcom
- Niesklasyfikowane Trisa
- Niesklasyfikowane Russound
- Niesklasyfikowane Galaxy Audio
- Niesklasyfikowane Sauter
- Niesklasyfikowane SVAT
- Niesklasyfikowane Ansco
- Niesklasyfikowane Rosseto
- Niesklasyfikowane Focal
- Niesklasyfikowane ARRI
- Niesklasyfikowane Fibaro
- Niesklasyfikowane Middle Atlantic
- Niesklasyfikowane Comatec
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025