Instrukcja obsługi Blackburn EX-1 Disc


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blackburn EX-1 Disc (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.9 gwiazdek

Strona 1/2
EX1 Disc™
Rack
Installation Instructions
Parts List:
6 – 10 mm Buttonhead Screws
2 – 25 mm Buttonhead Screws
8 – Nylock Nuts
2 – Extenders
2 – 1/2” Seat-Stay Clamps
1 – Reflector Bracket
1 – 3 mm Allen Wrench
Installation:
1. ATTACH EXTENDERS:
Attach extenders to
rack using four 10mm button head screws and
nylock nuts. Do not tighten. NOTE: Extenders
have an offset twist and can be installed in wide
or narrow position to match seat stay width.
2. STRUT ATTACHMENT:
Remove rear quick
release. Spread rack struts to fit on the
outside of the dropouts. Install extra long quick
release supplied with rack. Follow your
bicycle/wheel manufacturer recommendations
for removing and installing quick releases or
have a qualified bicycle shop replace it for you.
3. ATTACHING EXTENDERS:
Attach extenders
to the bike frame “Braze-on” mounts with
25mm buttonhead screws. Bend extenders (by
hand or with an adjustable wrench) to align with
braze-on mounts. NOTE: For bicycles without
seat stay “Braze-ons” use vinyl coated Seat-Stay
Clamps (2 sizes included). Attach with 10mm
screws and nylock nuts.
4. RACK ADJUSTMENT:
Adjust rack until rack
top is level with ground by sliding it on extenders
until level. Tighten all rack screws & nuts.
5. Install reflector bracket over rack and tighten
with reflector and reflector screw from your bicycle
.
Warning: Periodically check all nuts and bolts
for tightness.


Specyfikacje produktu

Marka: Blackburn
Kategoria: Niesklasyfikowane
Model: EX-1 Disc

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blackburn EX-1 Disc, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Blackburn

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025