Instrukcja obsługi Blaze BLZ-PROPB-NG

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blaze BLZ-PROPB-NG (17 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 3 użytkowników na średnio 4.5 gwiazdek

P a g e | 1

POWERBURNER

MODEL # BLZ--PBLP/NG & BLZ--PROPBLP/NG

INSTALLATIONANDOPERATING

INSTRUCTIONS

INSTALLER: Leave these instructions with consumer.

CONSUMER: READ & retainfor future reference.

Important: READ THESE INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION

SAFETY WARNINGSCODES &

DANGER

IFYOUSMELL GAS:

1. Shut off gasthe to the appliance.

2.any openExtinguish flame.

3. Remove lid to vent.

4.odor continues,awayIf keep fromthe

appliance,andimmediately call your

gas department.supplier or fire

WARNING

1.notorgasolineor otherDo store use

flammablevapors and liquidsin the

vicinityoforother appliance.this any

2. propane Acylinder not connected for use

shall beofnot storedin vicinitythe this

or any other appliance with flame.

CODE REQUIREMENTS:ANDSUPPLY Thispower

burnerbeaccordancelocal codesmust installed in with

and ordinances,absencelocal codes, or, thein of with

either the latestNationalFuelGasCode(ANSIZ223.1/

NFPA54),Natural Gas and Propaneandand Storage

Handling InstallationB149.1). Code(CSA-

Thisapplianceandindividual shutoffits valves must

be disconnectedsupplypiping from gasthe system

whentesting the system at pressuresin excess of

½ psi (3.5kPa).

Thisappliancemustbe isolated supplyfrom gasthe

piping systemby closingitsindividualmanual

shut-off valves duringanypressuretesting theof

gassupplyat pressures up system to and including

½ psi (3.5kPa).

WARNING

Improperinstallation,adjustment, alteration,

service,ormaintenance causeor can injury

propertydamage. Referto this manual. For

assistanceoradditionalinformation consult

aqualifiedprofessionalinstaller, service

agency, orsupplier. thegas

Allelectricalof poweroutlets in vicinitythe the

burnermustbeproperly grounded in

Accordancewithlocal codesor, in the

absence localof codes,with theNational

Electrical 70,Code,ANSI/NFPA orthe

CanadianElectrical C22.1,Code,CSA

whichever is applicable.

Keepelectrical supplyall

cords andfuelsupply

hoses awayany heated surface from at all

times including any sharp object.

Specyfikacje produktu