Instrukcja obsługi DBX PB48
DBX
Niesklasyfikowane
PB48
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DBX PB48 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 29 osób i została oceniona przez 15 użytkowników na średnio 4.5 gwiazdek
Strona 1/5
PB-48 Patchbay
INTRODUCTION
UNDERSTANDING PATCHBAYS AND THE PBdbx -48
(A) Normalled Patchbay (B) Half-Normalled [Mult-ed] Patchbay
(C) Half-Normalled Patchbay (D) De-Normalled Patchbay
[With Rear-Panel Normal Connection Broken]
Figure 1: Normalled, Half-Normalled and De-Normalled Patchbay Operation
SIGNAL FLOW
FRONTBACK
SOURCE 1
OUT
IN
IN
OUT
BACK
SIGNAL FLOW
FRONT
TO LOAD 2
TO LOAD 1
SOURCE
2
SOURCE
OUT
IN
OUT
BACK
SIGNAL FLOW
FRONT
TO LOAD 1
TO LOAD 2
SOURCE
IN
OUT
BACK
SIGNAL FLOW
FRONT
TO LOAD
The PB-48 is shipped from the factory with its circuit boards installed for
half-normalled patchbay operation. means that audio signalNormalled
automatically flows between a vertical pair of patchbay jacks without the
need for patchcords (see Figure 1-A). Normalled patchbays may be half-
normalled or full-normalled. In the half-normalled PB-48, each rear panel
upper jack is respectively normalled to the jack directly below it as long
as nothing is plugged into the lower front-panel jack. Half-Normalled
means that pluggging into the upper front-panel jack does not break the
connection between the upper and lower rear-panel jacks, while plug-
ging into the lower front panel jack breaks the connection (see Figures
1-B adn 1-C). Note: A full-normalled patch bayÕs rear-panel connections
are broken when plugging into either front-panel jack.
A simple example of using half-normalled operation: connect a mixerÕs
monitor out to one of the PB-48Õs rear panel upper jacks, then connect
the rear panel jack directly below it to a power amplifier. The ÒNormalledÓ
signal will flow from the mixer monitor out to the power amplifier, and will
only be broken when a connection is made to the corresponding front
panel lower jack.
Congratulations on purchasing the dbx PB-48 rackmountable patchbay.
The PB-48 features 48 front panel patchpoints and 48 rear panel patch-
points, from 24 user-adjustable board assemblies that can be configured
forHalf-Normalled or De-Normalled patchbay operation without soldering
or cutting wires. The PB-48 is a rugged, noise-free, patchbay designed
to serve all your patchbay needs, from providing clear and easy access
to your mixer and other studio gear, to reducing the wear and tear on
their jacks, to facilitating quick and precise re-routing of devices within
your studio setup. PB-48 patchbay jacks accept balanced TRS or unbal-
anced TS standard audio 1/4Ó plugs.
We recommend that you take a moment and read through this instruc-
tion sheet as it provides information that will assist you in using your
patchbay to its fullest. Explanations of standard patchbay jargon, with
plenty of pictures, are included to help demystify common patchbay
points of entanglement and clear up any misunderstandings you might
have. Examples, suggestions and tips are provided as a starting point
only. Experiment with different setups, so that you find the setup that
best fits your system.
1
Specyfikacje produktu
| Marka: | DBX |
| Kategoria: | Niesklasyfikowane |
| Model: | PB48 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z DBX PB48, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane DBX
30 Grudnia 2025
30 Grudnia 2025
6 Października 2024
30 Września 2024
16 Września 2024
15 Września 2024
13 Września 2024
11 Września 2024
11 Września 2024
10 Września 2024
Instrukcje Niesklasyfikowane
- Yamato
- Emporia
- Humminbird
- Posiflex
- Manitowoc
- Reginox
- Continental Edison
- Cypress
- Zoetis
- Macrom
- Canicom
- Harley Benton
- Elite Force
- GBC
- Zeiss
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025