Instrukcja obsługi Eizo VOP-01

Eizo Niesklasyfikowane VOP-01

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eizo VOP-01 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/2

User’s Manual

VESA Offset Plate

1st Edition-April, 2019 Printed in Japan.

UM-VOP-01-AL

03V27910A1

• Mount on a monitor with a flat mounting location that has VESA

standard compatible screw holes.

If the monitor is an EIZO monitor that does not have a flat

mounting location, a separate, EIZO specified spacer is

required. Please contact your dealer.

• Two types of screws with different lengths are included with this

product for mounting on monitors.

Retain the screws that are not used.

Check that all of the following items are contained in the package.

If any of these items are missing, contact your dealer.

Thank you very much for choosing an EIZO product. Please read

this User’s Manual carefully before using this product in order to

familiarize yourself with safe and effective usage. Please retain

this User’s Manual for future reference.

Please contact your dealer regarding monitors that are

compatible with this product.

Dispose of this product according to the regulations issued by

your local authority.

Inquiries regarding this product should be made to your local

EIZO representative.

www.eizoglobal.com

1. Mount the mounting plate to the DX0211-IP using the included

screws (M3 × 6). Consider the position for arranging the

DX0211-IP, and choose the mounting orientation of the

mounting plate.

2. Lay the monitor on a flat place and remove the arm from the

back of the monitor. (Retain the removed screws.)

Precautions

Package Contents Installation Procedure

Disposal

• Tighten the screws securely and completely.

Mount the screws reliably according to the directions in this document. If not sufficiently attached, the monitor and DX0211-IP may fall,

which may result in injury or equipment damage.

• Re-tighten the screws regularly.

If the screws become loose, the monitor and DX0211-IP may fall, which may result in injury or equipment damage.

WARNING

Monitor mounting screws

(M4 × 20) × 4

User's Manual

(this document)

Monitor mounting screws

(M4 × 14) × 4

DX0211-IP mounting screws

(M3 × 6) × 2

• The arm must satisfy the following conditions.

- Be of a type that supports mounting

- Have a sufficient load capacity to support the total weight of

the items to be mounted on the arm, such as the monitor,

mounting plate, and the DX0211-IP

Specifications

Inquiries

Mounting plate

● Outline Dimensions

(unit: mm)

Weight

Dimension of installation holes 100 mm × 100 mm

224.0 g

3. Place the mounting plate between the monitor and the arm, and mount it securely.

Use the appropriate screws.

● For the DX0211-IP cable connection and power on procedures, refer to the DX0211-IP Setup Manual.

• Mount the DX0211-IP with the power button side or the side with the High Temperature Caution label facing up when

installed on the monitor.

Attention

Mounting pattern

If mounting directly to an EIZO compatible

monitor and EIZO optional arm

If mounting with a spacer between an EIZO

compatible monitor and EIZO optional arm

In other cases

Screws to be used

Monitor mounting screws M4 × 14 (supplied)

Monitor mounting screws M4 × 20 (supplied)

Use screws with a length that is suitable for mounting the monitor and arm with the

additional thickness of the mounting plate.

www.eizoglobal.com

153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan

136 110

100

4 × Φ5

110

1.2

4.7

100

Specyfikacje produktu

Marka:	Eizo
Kategoria:	Niesklasyfikowane
Model:	VOP-01
Kolor produktu:	Czarny
Typ produktu:	Płyta urządzenia
Wysokość produktu:	120 mm
Szerokość produktu:	246 mm
Głębokość produktu:	4.7 mm
Waga produktu:	224 g
Interfejs do montażu panelu:	100 x 100 mm