Instrukcja obsługi Electro Harmonix Hot Wax
Electro Harmonix
Niesklasyfikowane
Hot Wax
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix Hot Wax (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 33 osób i została oceniona przez 17 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
HOT WAX
Dual Overdrive
Congratulations on your purchase of the Electro-Harmonix Hot Wax The Hot .
Wax is a unique dual overdrive pedal that combines the distortion sections
used by two EHX classics: the and the Each section can Crayon Hot Tubes.
be engaged independently, for two very different overdrive flavors, or
together to create a massive overdriven sound. The Hot Wax is a flexible and
great-sounding distortion unit useful for guitar, bass, keyboards, and many
other musical instruments.
The Hot Wax includes a two-knob EQ ( and for extensive BASS TREBLE)
tonal control, and control to mix between your dry and distorted a BLEND
sound. These three controls are active with either or both distortion sections
engaged, and bypassed when both overdrive section are turned off The Hot .
Wax features buffered bypass and is powered a standard 9V power jack. by
WARNING: Your Hot Wax comes equipped with an Electro-Harmonix 9.6DC-200BI power
supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The Hot Wax requires 75mA
at 9VDC with a center negative plug. Use of the wrong adapter or a plug with the wrong
polarity may damage your Hot Wax and void the warranty.
- USING THE HOT WAX-
Plug the included power adapter into the 9V jack. The pedal must be
powered to pass a signal through regardless of whether or not distortion is ,
engaged. Step on the footswitch to engage the Crayon sectionCRAYON .
The green D lights to indicate that the Crayon is on. Click the LE HOT TUBES
footswitch to turn on the Hot Tubes section, as indicated by the red LED.
The EQ and controls are active when either one or BASS & TREBLE BLEND
both sections are in use. When only one section is active, adjust that
section’s VOL (volu ) knob to set the master volume. When both sections me
are active:
The Crayon comes first in the signal path .
T VOL knob sets the level driving the Hot Tubes section. he Crayon’s
The EQ affects the signal
after
. the Hot Tubes’ distortion section
The BLEND knob combines the clean signal with the post-EQ signal.
T VOL knob functions as the master volume. he Hot Tubes’
- CONTROLS and I/O JACKS -
Footswitches and LEDs
The right LED (green) illuminates when the Crayon section is engaged via
the footswitch. The left (red) LED lights when using the Hot Tubes section.
VOL Knob (Crayon)
If only the Crayon is active, the knob sets master output level. If both VOL
sections are active, the VOL knob sets the level between the Crayon’s drive
section and the Hot Tubes’ drive section.
VOL Knob (Hot Tubes)
Use the Hot Tubes knob to set the master output level. VOL
DRIVE Knobs
Turn the appropriate knob to set the distortion intensity. DRIVE
BASS and TREBLE Equalization Knobs
Adjust the knob to boost or cut low frequencies. Adjust the BASS TREBLE
knob to boost or cut high frequencies. The frequency response for either
knob is flat (no boost or cut) when the knob is set halfway up.
BLEND Knob
The knob mixes the dry and distorted signal. With BLEND set to BLEND
minimum (fully counterclockwise), you will only hear the dry signal. When
BLEND is turned fully clockwise, you will only hear the distort signal. All ed
other settings will yield varying mixtures of dry and distorted sounds.
Turning BLEND down to add dry signal can add more punch and clarity,
along with more emphasis on pick attack This functionality may be of .
particular importan to bassists, as full-on distortion can reduce punch and ce
muddy up low end frequencies.
INPUT Jack
Plug your instrument or the output of another effects pedal into the ¼”
INPUT jack. The input impedance is 2.2M .
OUTPUT Jack
Use the jack to send the signal to an amp or another effects ¼” OUTPUT
pedal. The signal will be dry or effected based on the bypass status. The
output impedance is 220 .
Specyfikacje produktu
| Marka: | Electro Harmonix |
| Kategoria: | Niesklasyfikowane |
| Model: | Hot Wax |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Electro Harmonix Hot Wax, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Electro Harmonix
1 Stycznia 2025
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
29 Grudnia 2024
5 Grudnia 2024
7 Października 2024
7 Października 2024
7 Października 2024
5 Października 2024
Instrukcje Niesklasyfikowane
- Millenium
- Caple
- Cane Creek
- Weihrauch Sport
- Franken
- Tiptel
- HQ
- Jata
- Ergie
- Grosfillex
- CRAFT + MAIN
- Hayter
- Moxa
- MagnaPool
- Vivanco
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025