Instrukcja obsługi Electro Harmonix Super Switcher

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix Super Switcher (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 7 użytkowników na średnio 4.4 gwiazdek

1

SUPER SWITCHER

Programmable Effects Hub

Congratulations on your purchase of the Super Switcher, a full-featured

programmable effects hub that is capable of controlling your entire rig. The Super

Switcher is able to handle jobs as simple as aneffects loop switcher orascomplex

as a programmable effects loop preset designer. TheSuper Switcher can send tap

tempo toother pedals, includes two general purpose control outputs, and features

MIDI input and output allowing automated control over just about any MIDI device

for nearly endless possibilities. Scratch the surface of tone shaping with the Super

Switcher and achieve studio style effects programming that cannot be

accomplished with traditional pedal set ups. No more tap dancing!

WARNING: Your Super Switcher comes equipped with an Electro-Harmonix 9.6DC-200BI

power supply. The Super Switcher requires 150mA at 9VDC with a center negative plug.

Useof the wrong adapter or a plug with the wrong polarity may damage your Super

Switcher and voidthewarranty. Donotexceed 10.5VDC onthepower plug. Power supplies

rated for less than 150mA will cause the Super Switcher to act unreliably.

FEATURES

•Programmable pedal switcher

•Mechanical relay switching for true bypass signal paths

•8 FX loops (6 mono & 2 stereo)

•16 Banks of 8 presets each

•Pedalboard controller with MIDI In and Out

•1 hardwired insert loop between FX loops 5 and 6

•2 Instant Access Modes allowing direct control over FX loops

•Stereo output boost

•Onboard Tap Tempo with TAP output

•Tuner output

•2 general-purpose control footswitches

Specyfikacje produktu