Instrukcja obsługi Electro Harmonix LPB-1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix LPB-1 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 16.5 użytkowników na średnio 3.9 gwiazdek

Strona 1/3
LPB- LINEAR POWER BOOSTER 1
-DESCRIPTION-
Congratulations! You have just purchased the LPB-1 Power Booster, a
reissue of the product that first ushered in the age of overdrive in 1968. With
the LPB-1 you’ll be able to increase guitar sustain, and increase the
performance of all other effects, especially distortion devices.
-CONTROLS-
BOOST CONTROL Adjusts the amount of boost.
FOOTSWITCH Engages and disengages the effect. When the LED is on
the pedal is engaged. When off, it is in True Bypass mode.
-OPERATION AND WARNINGS-
Power, from the internal 9-volt battery or external battery eliminator, is
activated by plugging into the input. The input cable should be removed
when the unit is not in use to avoid running down the battery. The input
impedance presented at the Input Jack is 43 kohms. The output impedance
at the Output Jack is 10 kohms.
The barrel connector on the front of LPB-1 is for a 9-volt battery eliminator
capable of delivering 100 mA of current. The inner ring of the 9-volt battery
eliminator must be negative, the outer ring positive. The unit’s battery may
be left in or taken out when the eliminator is in use.
To change the 9-volt battery, you must remove the 4 screws on the bottom
of the LPB-1. Once the screws are removed, you can take off the bottom
plate and change the battery. Please do not touch the circuit board while the
bottom plate is off or you may damage a component.


Specyfikacje produktu

Marka: Electro Harmonix
Kategoria: Niesklasyfikowane
Model: LPB-1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix LPB-1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą