Instrukcja obsługi Festo DADP-TL-F3-32

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Festo DADP-TL-F3-32 (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 3 użytkowników na średnio 4.8 gwiazdek

Translation of the original instructions

© 2020 all rights reserved to & Co. KGFesto SE

1Applicable Documents

All available documents for the product www.festo.com/sp.è

DocumentProductContents

InstructionsStopper cylinder DFST-32-...-G2Operating

Tab. 1

2Safety

2.1Safety instructions

–Only assemble the product on components that are in a condition to be safely

operated.

–Observe tightening torques. Unless otherwise specified, the tolerance

is±20%.

2.2Intended Use

Interlocking of the toggle lever on the stopper cylinder DFST-32 -...- G2.

3Product overview

3.1Product range overview

3.1.1Scope of Delivery

1

Screw (1x)

2

Shaft (1x)

3

Leg spring (1x)

4

Locking pin (1x)

5

Screw (1x)

Fig. 1

3.1.2Not in Scope of Delivery

6

Stopper cylinder (1x)

DFST-32-...-G2

Fig. 2

4Mounting

4.1Assembly

Fig. 3 Combine spring and locking pin

•Position the leg spring and the locking pin together.34

Ä

The long shank [X] lies on the locking pin.4

Fig. 4 Lock the locking pin and leg spring

1.Position the leg spring and the locking pin together on the drilled34

hole[A].

2.Push the shaft through the drilled hole[B], the leg spring and the lock-23

ing pin into the hole[A].4

Fig. 5 Fasten shaft

•Tighten the screw in the drilled hole[B]. Tightening torque:3Nm1

Fig. 6 Mount the stop

•Tighten the screw in the drilled hole[C]. Tightening torque:3Nm5

Fig. 7 Test function

•Press the toggle lever[D] upwards.

Ä

The locking pin clicks audibly into place.4

5Disassembly

Disassembly is performed in the reverse order to assembly.

CAUTION!

Leg spring under tension

The leg spring can crush or scratch fingers and body parts during disassembly.

•Use a tool to carefully release the tension of the leg spring.

8107277

DADP-TL-F3-32

Lever locking mechanism

8107277

2020-01

[8107279]

Instructions| Assembly

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Specyfikacje produktu