Instrukcja obsługi Fibaro FGBHFS-101
Fibaro
inteligentny dom
FGBHFS-101
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fibaro FGBHFS-101 (13 stron) w kategorii inteligentny dom. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.8 gwiazdek
Strona 1/13
CONTENTS
#1: Description and features 3
#2: Powering the accessory 4
#3: Pairing the accessory 5
#4: Physical installation 6
#5: Reset 7
#6: Functionalities 8
#7: Congurable parameters 9
#8: Specications 10
#9: Regulations 11
FIBARO FLOOD SENSOR
FGBHFS-101
O P E R A T I N G
M A N U A L
EN
v1.1
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
!
HomeKit technology
Apple HomeKit technology provides an easy, secure way to control
HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod
touch.
After installing your FIBARO Flood Sensor, congure it from a
compatible app with just a few simple steps.
You can even create your own custom scenes to control your home
settings. For example, you can create a scene to automatically turn
o the lights, lock your doors, close the garage door, and set the
thermostat to the desired temperature in just one step.
To control this HomeKit-enabled accessory, iOS 9.3.5 or later is
recommended.
Controlling this HomeKit-enabled accessory automatically and
away from home requires an Apple TV with tvOS 9.2 or later or
an iPad with iOS 9.3 or later set up as a home hub.
i
3
DESCRIPTION AND FEATURES
Main features of FIBARO Flood Sensor:
• compatible with Apple HomeKit technology
• Bluetooth® low energy technology for wireless communication
• detects ooding
• detects tampering using accelerometer or when the casing is opened
• easy installation - simply put on a surface prone to ooding
• may be installed anywhere - sensor can be extended using
an external probe (not included)
• battery powered
• indicates state using LED diode and buzzer
FIBARO Flood Sensor is a HomeKit-enabled water sensor using
Bluetooth® low energy technology.
Along with detecting ooding, the accessory measures the ambient
temperature.
Tampering is detected whenever the accessory is moved or casing is
opened.
Built-in LED indicator and an acoustic alarm signal ooding and
tampering. The LED can be also used to identify the accessory.
The accessory is designed to be placed on the oor or mounted on a
wall (in this case sensor should be extended using an external probe).
The accessory is sink-proof, which means it drifts on the water surface
and keeps on sending alarm signal in case of substantial inundation
of water.
#1: Description and features
Specyfikacje produktu
| Marka: | Fibaro |
| Kategoria: | inteligentny dom |
| Model: | FGBHFS-101 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Fibaro FGBHFS-101, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje inteligentny dom Fibaro
30 Grudnia 2025
15 Września 2024
15 Września 2024
13 Września 2024
12 Września 2024
12 Września 2024
11 Września 2024
11 Września 2024
11 Września 2024
10 Września 2024
Instrukcje inteligentny dom
- inteligentny dom SwitchBot
- inteligentny dom Sungrow
- inteligentny dom ABB
- inteligentny dom V-TAC
- inteligentny dom Devolo
- inteligentny dom Kogan
- inteligentny dom Tellur
- inteligentny dom Silvergear
- inteligentny dom Logicom
- inteligentny dom TechniSat
- inteligentny dom REV
- inteligentny dom Gira
- inteligentny dom WiZ
- inteligentny dom Burg Wächter
- inteligentny dom Tjilla
Najnowsze instrukcje dla inteligentny dom
29 Marca 2025
29 Marca 2025
29 Marca 2025
27 Marca 2025
18 Marca 2025
18 Marca 2025
12 Marca 2025
25 Lutego 2025
19 Lutego 2025
14 Lutego 2025