Instrukcja obsługi Frigidaire 5304473845

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Frigidaire 5304473845 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 9 użytkowników na średnio 4.5 gwiazdek

4' Rubber Fill Hose 2 Pack

5304473845

Paquete de 2 mangueras de llenado de caucho de 4'

Paquet de 2 tuyaux de remplissage en caoutchouc de 4 pi

Installation

1. Run some water from the hot and cold faucets to ush the

water lines and remove particles that might clog the water

valve screens and to determine which faucet is hot and

which is cold supply. (Fig. 1).

5304473845 (August 2022)

Fig. 1

Fig.2

Cold Hot

Fig. 3

2. Check to ensure the inlet hoses have the rubber washer

rmly in place. (Fig. 2).

3. Connect the HOT inlet hose (color: red) to the HOT inlet

connection on the washer and the COLD inlet hose to the

COLD inlet connection (color: blue) on the washer. (Fig. 3).

4. Tighten by hand until snug. Then tighten each supply

connection another 2/3 turn with pliers. Do not cross thread

or overtighten these connections. (Fig. 4).

5. Connect the HOT inlet hose to the HOT water supply and the

COLD inlet hose to the COLD water supply. (Fig 5).

Fig. 4

7. Turn on the water and check for leaks. (Fig. 7).

Fig. 5

6. Tighten by hand until snug. Then tighten each supply

connection another 2/3 turn with pliers. Do not bend, kink or

pinch water inlet hoses. (Fig. 6).

Fig. 6

The water supply pressure must be between 14.5 PSI and 116 PSI.

If the water supply pressure is more than 116 PSI, you must install

a pressure reducing valve. The washer requires both a hot NOTE:

and a cold water supply to be attached. The water supply for the

hot water valve should be at least 120˚F.

Replace water supply hoses every 2 to 3 years.

Fig. 7

Specyfikacje produktu