Instrukcja obsługi FSR CB-22+
FSR
Niesklasyfikowane
CB-22+
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla FSR CB-22+ (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/2
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
CB22+ Installation Instructions
LIT188543466
Structural Channel
Route conduit (supplied by customer)
to knockouts as required
Structural Member
supplied by customer
All mounting hardware
ONLY
AC Access Plate
AC POWER INPUT WIRING MUST
BE PERFORMED BY A QUALIFIED
ELECTRICIAN
4x #8-32 x 1/4" Long
Pan Head Screw
Turn latch to open door
Shelf
Drop Ceiling Material
(supplied by customer)
b
a
18-3/4" x 22-1/2"
4x Capture Tab
Cables support the Ceiling Box, and are NOT
door up towards ceiling and (b) push towards shelf -
INTENDED FOR USE WITH COMMON "T" GRID
tabs over ceiling panel to hold in place.
Model Number CB-MNT1
completely remove door. Installation of 18-3/4" x 22-1/2"
Door Removal:
building codes. Install safety cable as required by local building
DROP CEILING AND IS NOT COMPATIBLE
gross weight. Use appropriate mounting methods based on local
after AC wiring is complete.
NOTE:
WITH ALL DROP CEILINGS.
1.
(Alternate Method 2)
3.
required by building codes.
safety cables.
codes. Route conduits to box as required.
drop ceiling material into door can be done as required,
while door is off or during re-assembly. Bend capture
Install CB-22+ to a structural ceiling able to support 5x the noted
Mounting:
reverse procedure to install. Disconnect safety cable to
2.
Quick 3/32" Cable Installation KIt (sold seperately)
NOTE: Ceiling Box suspension method
(Shown) Threaded steel rod (1/4"-20 minimum) is
required for applications where the pole is
supporting more than 50lbs. and is recommended
for all ceiling box installations to minimize fixture
movement.
(Alternate Method 1)
12 ga. steel wire may be used (supplied by
customer) at 70,000 psi tensile strength or better as
Turn latch to open door (unlock if needed). (a) Push
To install AC main power into unit, remove AC access
plate by removing 4x #8-32 screws, as shown. Wiring
must be performed by a qualified electrician only.
Wiring must be done in accordance with all NEC and
other applicable codes. Re-install AC access plate
AC Wiring:
Specyfikacje produktu
| Marka: | FSR |
| Kategoria: | Niesklasyfikowane |
| Model: | CB-22+ |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z FSR CB-22+, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane FSR
28 Stycznia 2025
Instrukcje Niesklasyfikowane
- Schoeps
- LYYT
- Suntec
- RDL
- Hähnel
- ECG
- ReTrak
- OnePlus
- E-ast
- Tech 21
- Adventure Kings
- Dux
- Doepke
- Arris
- Brabantia
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025