Instrukcja obsลugi Leviton 49990-LDL
Leviton
Niesklasyfikowane
49990-LDL
Przeczytaj poniลผej ๐ instrukcjฤ obsลugi w jฤzyku polskim dla Leviton 49990-LDL (11 stron) w kategorii Niesklasyfikowane. Ta instrukcja byลa pomocna dla 18 osรณb i zostaลa oceniona przez 9.5 uลผytkownikรณw na ลrednio 5.0 gwiazdek
Strona 1/11
PK-A3141-10-02-5A
(REF-0R-49990-00 -06)-00
๎
๎,>?๎๎@=0๎๎4-0=๎!;?4.๎๎:990.?:=
%๎๎๎! ๎๎&!$
๎๎๎๎๎๎๎%&
๎๎๎๎๎๎%%&
๎๎๎๎๎๎๎%๎
๎๎๎๎๎๎๎%๎
๎๎๎๎๎๎%%๎๎
๎๎๎๎๎๎๎๎๎๎
๎๎๎๎๎๎๎๎๎
๎๎๎๎๎๎%๎๎
๎๎๎๎๎๎๎๎๎
๎๎๎๎๎๎๎๎๎
๎๎๎๎๎๎%๎๎
%&R๎! ๎๎&!$
A Division of Leviton Manufacturing Co.,Inc.
Technical Support: 800-824-3005
Fax: (425) 483-5270
www.levitonvoicedata.com
Description Part No.
Multimode STโConnector 50/125 & 62.5/125 49990-MST
Singlemode STโConnector 49990-SST
Multimode SCโConnector 50/125 &โ62.5/125 (beige) 49990-MSC
LO Multimode SC Connector (aqua) 49990-LSC
Singlemode SCโConnector (blue) 49990-SSC
SC Duplex Clip, black (Bag of 25) 49886-DSC
Mulimode LCโConnector with 3mm boot (beige) 49990-ML2
LO Multimode LCโConnector with 3mm boot (aqua) 49990-LL2
Singlemode LC Connector with 3mm boot (blue) 49990-SL2
Multimode LCโConnector with .9mm boot (beige) 49990-MDL
LO Multimode LCโConnector with .9 mm boot (aqua) 49990-LDL
Singlemode LCโConnector with .9mm boot (blue) 49990-SDL
LCโDuplex Clip, Multimode, beige (bag of 25) 49886-DLM
LCโDuplex Clip, Singlemode, blue (bag of 25) 49886-DLS
Fast Cure Tool Kit 49800-FTK
Fast Cure Consumables Kit 49800-FCC
Adhesive Primer Kit 49800-680
Crimp Tool with .128, .151, .178 hex die 49886-FCT
Replacement Needles (19 gauge, bags of 25) 49886-FCN
Syringes (bags of 25) 49886-SYR
LCโPolishing Puck 49886-LCP
LCโDuplex Scope Adapter 49886-LCD
LC Simplex Scope Adapter 49886-LCS
Fast Cure Carrying Case 49886-FCC
Part Numbers
๎๎๎๎! ๎๎&!$
PK-A3141-10-02-5A
(REF-0R-49990-00- 06)00-
๎๎
%&๎%๎๎)๎๎๎๎๎๎&๎๎๎๎๎๎๎๎
๎
๎๎๎
๎๎๎)๎๎๎๎๎๎&๎๎๎๎๎๎๎๎
๎๎๎
๎๎๎๎๎'๎๎๎$๎๎๎๎๎๎๎๎
๎๎๎
๎>>08-7D๎๎9>?=@.?4:9>๎
๎๎
๎๎"$๎"๎$๎
๎77๎๎:990.?:=๎&D;0>๎
NOTE: If using 900 ยตm buffered fiber, do not use the crimp tube in step 1.
1. Slide the boot and the crimp tube onto the fiber, with the small end inserted first. (Figure 1)
๎:=๎๎88๎๎,.60?0/๎๎,-70๎๎Use the ribbed boot, provided.
๎:=๎๎๎๎S8๎๎@110=0/๎๎,-70๎๎Use the smooth boot, provided.
NOTE: If using an SC Connector on 900ยตm buffered fiber, you must install the SC body into the housing
before continuing to step 2. Align the body with the connector housing, then insert the body into
the housing until it snaps into place. Use the dust cap to push the body into the housing.
2. Strip the jacket and/or buffer using the measurements provided in the chart below, and strip in
increments of 1/4โ. If using jacketed cable, trim the aramid strands as indicated, below.
(Figure 2a-c)
!&๎๎๎&:๎307;๎,A:4/๎?::7๎๎-@110=๎,9/๎14-0=๎.:9?,849,?4:9๎๎.70,9๎5,.60?๎,9/๎0C;:>0/๎-@110=๎B4?3
,๎๎๎๎๎,7.:3:7๎B4;0๎๎?309๎B4?3๎,๎749?๎1=00๎B4;0๎๎-:?3๎-01:=0๎,9/๎,1?0=๎>?=4;;492๎
3. Clean exposed fiber with a 99% alcohol wipe followed by a lint-free wipe to remove any contaminants.
๎ !&๎๎๎๎8,20>๎,=0๎9:?๎?:๎>.,70๎
%๎๎๎:990.?:=๎&D;0>๎:9๎๎88๎๎,.60?0/๎๎,-70๎! ๎+๎
4. Insert spacer over buffer and push all the way down, until it rests against the jacket. (Figure 3)
๎7409?๎ :?0>๎ :?0>๎/0๎7W@?474>,?0@=๎ :?,>๎/07๎@>@,=4:๎
strip length 20 mm
1/4
1/4
3/4
1 3/4
1/2
1 1/2
apply primer 10mm
๎
๎ !&๎๎๎๎8,20>๎,=0๎9:?๎?:๎>.,70๎
PK-A3141-10-02-5A
(REF-0R-49990-00- 06)00-
๎
๎
๎๎๎๎%%๎๎๎๎๎
๎77๎๎:990.?:=๎,9/๎๎4-0=๎&D;0>๎
1. Remove the dust cap from the connector.
2.
2.
2.
2.2. Dry fit the fiber by inserting the fiber into the connector. This will assure that all coating has been
removed and the fiber can be inserted into the connector ferrule.
3. Shake the adhesive bottle before using. Remove the cap from the adhesive bottle, and attach the
needle by pressing it gently onto the top of the bottle until you feel it set into place.
NOTE: Syringes are also available for inserting adhesive.
4. Insert the needle and firmly hold it against the back of the connector while filling it. Being careful not to
overfill the connector, squeeze the bottle gently, injecting the adhesive into the connector. Continue
until a dot of adhesive is visible at the other end, then remove the needle. Wipe away excess adhesive
from the end of the ferrule.
5. Using the brush attached to the lid on the bottle of primer, apply the primer to the first 10mm of the
exposed fiber. See figure 2a.
6. Insert the fiber into the back of the connector. To prevent premature bonding, use continuous motion,
until the fiber is fully seated in the connector. The primer will activate adhesive and begin the bonding
process.
!&๎๎๎&30๎14-0=๎>3:@7/๎-0๎49>0=?0/๎B4?349๎๎๎๎>0.:9/>๎:1๎;=48492๎
7. Hold the fiber in place for 10-20 seconds, and allow up to 3 minutes for the adhesive to bond.
8. If using any cable type but jacketed fiber, slide the boot back up over the back of the connector, now. If
using jacketed fiber, follow the steps, below.
๎//4?4:9,7๎%?0;>๎๎:=๎๎88๎๎,.60?0/๎๎,-70๎! ๎+๎
9. Arrange the aramid strands evenly around the end of the connector, then slide the crimp tube over the
aramid strands and connector. Using a crimp tool, crimp the tube at both the large end (step 1) and the
small end (step 2). (Figure 4)
%&๎%๎๎๎๎7,=20๎09/๎๎Use the .178โ hex die.
%&๎%๎๎๎๎>8,77๎09/๎๎Use the .151โ hex die.
๎๎๎๎Use the .128โ hex die.
๎
๎7409?๎ :?0>๎ :?0>๎/0๎7W@?474>,?0@=๎ :?,>๎/07๎@>@,=4:๎
๎๎
Specyfikacje produktu
| Marka: | Leviton |
| Kategoria: | Niesklasyfikowane |
| Model: | 49990-LDL |
Potrzebujesz pomocy?
Jeลli potrzebujesz pomocy z Leviton 49990-LDL, zadaj pytanie poniลผej, a inni uลผytkownicy Ci odpowiedzฤ
Instrukcje Niesklasyfikowane Leviton
28 Grudnia 2024
8 Paลบdziernika 2024
8 Paลบdziernika 2024
8 Paลบdziernika 2024
8 Paลบdziernika 2024
8 Paลบdziernika 2024
8 Paลบdziernika 2024
7 Paลบdziernika 2024
23 Wrzeลnia 2024
22 Wrzeลnia 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Kerbl
- Niesklasyfikowane Lancom
- Niesklasyfikowane Arylic
- Niesklasyfikowane Elinchrom
- Niesklasyfikowane Caberg
- Niesklasyfikowane Lockncharge
- Niesklasyfikowane Cyrus
- Niesklasyfikowane Game Factor
- Niesklasyfikowane Morphor
- Niesklasyfikowane Connect IT
- Niesklasyfikowane Amgrow
- Niesklasyfikowane Vermona Modular
- Niesklasyfikowane Kambrook
- Niesklasyfikowane Casablanca
- Niesklasyfikowane Guardian
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025