Instrukcja obsล‚ugi Lynx Technik Yellowbrik HD 1802-1

Lynx Technik Niesklasyfikowane Yellowbrik HD 1802-1

Przeczytaj poniลผej ๐Ÿ“– instrukcjฤ™ obsล‚ugi w jฤ™zyku polskim dla Lynx Technik Yellowbrik HD 1802-1 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja byล‚a pomocna dla 10 osรณb i zostaล‚a oceniona przez 5.5 uลผytkownikรณw na ล›rednio 3.9 gwiazdek

Pobierz PDF
Strona 1/2
LYNXTechnik AG
yellobrik
Quick
Reference
ยฎ
CHD 1802-1
HDMI to SDI Converter
USB Connection
(for yelloGUI control & updates)
Power In (12v)
SDI Fiber Output
(Option)
SDI Outputs (2)
HDMI Present
Warning
Class 1 Laser Product
HDMI Input
NOTE: This module will not convert HDMI
content which has embedded HDCP
copy protection.
Power / Status LED
Module LEDs
The module has several LEDs included to indicate status.
Function is described below:
HDMI Present LED
= Valid signal connected / converted
= (out) Signal not valid or missing (or if HDMI has HDCP protection)
Power / Status LED
= Power OK and no internal programmed settings are present
= Power OK and some programmed settings are active*
= (out) Power not present
* Some settings have been made using the yelloGUI and the LED indicates this
by turning yellow. The module can be reset to factory default using the yelloGUI
application, or by using the internal reset switch on the side of the module,
which can be accessed though a hole with a paperclip (or similar).
USB Port / Firmware Updates / yelloGUI
The USB interface on the module is used for ๎˜Ÿrmware updates and for
control of the module using the yelloGUI software application.
To update a yellobrik, power it and connect it to the PC or Mac running
the yelloGUI software with the provided USB cable. The yelloGUI
software will indicate if a new ๎˜Ÿrmware is available for the connected
module and will guide you through the update process.
Firmware updates are always free of charge.
For more information and to download the yelloGUI application please
goto:
http://yellogui.lynx-technik.com
HDMI is connected but no SDI output ? - Common Causes
When two HDMI devices are connected together the EDID
communication protocol automatically determines the highest
resolution both devices support and con๎˜Ÿgures the HDMI link to that
resolution. As the CHD 1802-1 supports video formats up to
1080p/60Hz the SDI output will typically default to 1080p/60 (3Gbit/s
SDI) which if used in a standard 1.5GHz or 270Mbit SDI environment will
not display an image. If 1.5Gbit or 270Mbit SDI output is needed, then
the HDMI source device should be manually set to output the desired
video resolution. Alternatively, it is possible to use the yelloGUI
application to force the CHD 1802-1 into the desired video format. ๎˜Ÿ๎˜ž ๎˜ ๎˜œ
๎˜› ๎˜š ๎˜œ๎˜™ ๎˜˜ ๎˜œ๎˜— ๎˜˜ ๎˜–๎˜œ๎˜• ๎˜” ๎˜“๎˜š ๎˜œ๎˜” ๎˜— ๎˜œ๎˜’๎˜— ๎˜–๎˜š ๎˜‘๎˜— ๎˜” ๎˜๎˜œ๎˜ ๎˜ ๎˜” ๎˜๎˜š ๎˜‘๎˜Ž๎˜œ๎˜–๎˜• ๎˜’๎˜๎˜œ๎˜’๎˜ ๎˜œ๎˜™ ๎˜˜ ๎˜— ๎˜š ๎˜œ๎˜ ๎˜Œ ๎˜œ๎˜๎˜’๎˜‹ ๎˜’๎˜–๎˜’๎˜— ๎˜Š ๎˜œ๎˜–๎˜• ๎˜š ๎˜œ๎˜‰๎˜˜ ๎˜‘๎˜‹ ๎˜” ๎˜– ๎˜๎˜œ
๎˜‘๎˜š ๎˜ˆ ๎˜˜ ๎˜‘ ๎˜–๎˜š ๎˜™ ๎˜œ๎˜˜ ๎˜“ ๎˜š ๎˜‘๎˜œ๎˜‡ ๎˜† ๎˜…๎˜† ๎˜œ๎˜ ๎˜˜ ๎˜œ๎˜–๎˜• ๎˜š ๎˜œ๎˜ ๎˜š ๎˜— ๎˜™ ๎˜’๎˜— ๎˜Š ๎˜œ๎˜™ ๎˜š ๎˜“ ๎˜’๎˜ ๎˜š ๎˜œ๎˜ ๎˜• ๎˜” ๎˜— ๎˜Š ๎˜š ๎˜ ๎˜œ๎˜’๎˜–๎˜ ๎˜œ๎˜„ ๎˜† ๎˜ƒ ๎˜…๎˜œ๎˜‘๎˜š ๎˜ ๎˜˜ ๎˜๎˜‚ ๎˜–๎˜’๎˜˜ ๎˜— ๎˜
The HDMI content may have HDCP copy protection, in which case the
HDMI present LED will be OUT and the module will block the conversion
and provide a black SDI output.
Note:๎˜œ๎˜œ๎˜ž ๎˜œ๎˜๎˜˜ ๎˜–๎˜œ๎˜˜ ๎˜‰๎˜œ๎˜ˆ ๎˜๎˜” ๎˜Œ ๎˜ ๎˜” ๎˜ ๎™ฟ ๎˜œ ๎˜ ๎˜˜ ๎˜— ๎˜ ๎˜‚ ๎˜‹ ๎˜š ๎˜‘ ๎˜œ๎˜™ ๎˜š ๎˜“ ๎˜’๎˜ ๎˜š ๎˜ ๎˜œ๎˜’๎˜‹ ๎˜ˆ ๎˜˜ ๎˜๎˜š ๎˜œ๎˜• ๎˜” ๎˜‘ ๎˜™ ๎˜› ๎˜” ๎˜‘๎˜š ๎˜œ๎˜„ ๎˜† ๎š ๎š ๎˜œ๎˜ ๎˜˜ ๎˜ˆ ๎˜Œ ๎˜œ๎˜ˆ ๎˜‘๎˜˜ ๎˜–๎˜š ๎˜ ๎˜– ๎˜’๎˜˜ ๎˜— ๎˜œ
๎˜š ๎˜“ ๎˜š ๎˜— ๎˜œ๎˜’๎˜‰๎˜œ๎˜– ๎˜• ๎˜š ๎˜œ๎˜ ๎˜˜ ๎˜‚ ๎˜‘๎˜ ๎˜š ๎˜œ ๎˜‹ ๎˜š ๎˜™ ๎˜’๎˜” ๎˜œ๎˜’๎˜ ๎˜œ๎˜— ๎˜˜ ๎˜–๎˜œ๎˜ ๎˜˜ ๎˜ˆ ๎˜Œ ๎˜œ๎˜ˆ ๎˜‘๎˜˜ ๎˜– ๎˜š ๎˜ ๎˜– ๎˜š ๎˜™ ๎š๎˜œ ๎˜œ๎š ๎˜๎˜š ๎˜” ๎˜๎˜š ๎˜œ๎˜“ ๎˜š ๎˜‘ ๎˜’๎˜‰๎˜Œ ๎˜œ๎˜– ๎˜• ๎˜š ๎˜œ๎˜˜ ๎˜ˆ ๎˜š ๎˜‘๎˜” ๎˜– ๎˜’๎˜˜ ๎˜— ๎˜œ๎˜˜ ๎˜‰๎˜œ๎˜– ๎˜• ๎˜š ๎˜œ
๎˜Œ ๎˜š ๎˜๎˜๎˜˜ ๎˜ ๎˜‘๎˜’๎™ฟ ๎˜œ๎˜‹ ๎˜˜ ๎˜™ ๎˜‚ ๎˜๎˜š ๎˜œ๎˜˜ ๎˜— ๎˜œ๎˜” ๎˜œ๎˜„ ๎˜† ๎˜ƒ ๎˜…๎˜œ๎˜ ๎˜˜ ๎˜‚ ๎˜‘ ๎˜ ๎˜š ๎˜œ๎˜› ๎˜• ๎˜’๎˜ ๎˜• ๎˜œ๎˜’๎˜ ๎˜œ๎™ฟ ๎˜— ๎˜˜ ๎˜› ๎˜— ๎˜œ๎˜— ๎˜˜ ๎˜–๎˜œ๎˜– ๎˜˜ ๎˜œ๎˜• ๎˜” ๎˜“ ๎˜š ๎˜œ๎˜„ ๎˜† ๎š ๎š ๎˜œ๎˜ ๎˜˜ ๎˜ˆ ๎˜Œ ๎˜œ
๎˜ˆ ๎˜‘๎˜˜ ๎˜–๎˜š ๎˜ ๎˜–๎˜’๎˜˜ ๎˜— ๎˜œ๎˜Ÿ๎˜š ๎š๎˜Š ๎š๎˜œ๎˜‹ ๎˜˜ ๎˜ ๎˜–๎˜œ๎˜„ ๎˜† ๎˜ƒ ๎˜…๎˜œ๎˜ ๎˜” ๎˜‹ ๎˜š ๎˜‘๎˜” ๎˜ ๎˜๎˜œ๎˜ ๎˜š ๎˜‰๎˜˜ ๎˜‘๎˜š ๎˜œ๎˜ ๎˜˜ ๎˜— ๎˜–๎˜” ๎˜ ๎˜–๎˜’๎˜— ๎˜Š ๎˜œ๎˜– ๎˜š ๎˜ ๎˜• ๎˜— ๎˜’๎˜ ๎˜” ๎˜๎˜œ๎˜ ๎˜‚ ๎˜ˆ ๎˜ˆ ๎˜˜ ๎˜‘ ๎˜–๎š
Still Having Problems?
Please visit the support center on our website and browse or search the
knowledge base, or open a support ticket with your speci๎˜Ÿc questions
๎˜Ÿ ๎˜Ÿ ๎˜Ÿ ๎˜ž๎˜ ๎˜œ ๎˜› ๎˜š ๎˜™ ๎˜˜ ๎˜— ๎˜– ๎˜• ๎˜› ๎˜”๎˜“ ๎˜ž๎˜– ๎˜’ ๎˜‘ ๎˜๎˜๎˜๎˜Ž ๎˜ ๎˜Œ ๎˜Œ ๎˜’ ๎˜‹ ๎˜˜ ๎˜๎˜๎˜๎˜Š ๎˜— ๎˜– ๎˜• ๎˜™๎˜Ž ๎˜ ๎˜Œ ๎˜Œ ๎˜’ ๎˜‹ ๎˜˜
Power Lead Strain Relief
The module has a small hole in
the case located above the
power connection. To prevent
the power lead being
accidentally pulled out, use the
supplied tie-wrap and secure
the lead as shown opposite.
Reset (hole)

Specyfikacje produktu

Marka: Lynx Technik
Kategoria: Niesklasyfikowane
Model: Yellowbrik HD 1802-1

Potrzebujesz pomocy?

Jeล›li potrzebujesz pomocy z Lynx Technik Yellowbrik HD 1802-1, zadaj pytanie poniลผej, a inni uลผytkownicy Ci odpowiedzฤ…


Instrukcje Niesklasyfikowane Lynx Technik

Lynx Technik

Lynx Technik Yellowbrik HD 1802-1 Instrukcja

3 Paลบdziernika 2024
Lynx Technik

Lynx Technik Yellowbrik CDH 1411 Instrukcja

3 Paลบdziernika 2024
Lynx Technik

Lynx Technik Yellowbrik CHD 1402 Instrukcja

3 Paลบdziernika 2024
Lynx Technik

Lynx Technik Yellowbrik QS 1441 Instrukcja

3 Paลบdziernika 2024
Lynx Technik

Lynx Technik Yellowbrik CHD 1812-1 Instrukcja

3 Paลบdziernika 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
Rock N Roller

Rock N Roller R14G Instrukcja

29 Stycznia 2025
Rock N Roller

Rock N Roller R6RT Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
Shimbol

Shimbol Memory I PRO Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025