Instrukcja obsługi Metra 99-3527
Metra
Niesklasyfikowane
99-3527
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra 99-3527 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/4

METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
REV. 3/9/2016 INST99-3527
Installation instructions for part 99-3527
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• A) Radio housing • B) Trim plate • C) ISO brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • GMOS-01 • GMOS-04
Antenna Adapter: • 40-GM10
• Phillips screwdriver • Panel removal tool • 9/32” socket wrench
TOOLS REQUIRED
Pontiac Grand Prix 2004-2008
99-3527
A B C
Dash Disassembly ..................................................2
Kit Assembly
– DIN radio provision with pocket ............................ 3
– ISO DIN radio provision with pocket ...................... 3
Table of Contents

99-3527
2
1. Remove the bezel from around
the key cylinder. (Figure A)
2. Unclip and remove the entire
panel surrounding the radio,
including the
message center
and the vents. (Figure B)
3. To remove the radio, start at
bottom of the stack and remove
(8) 9/32” screws from the pocket,
climate control, and the radio.
(Figure C)
Continue to kit assembly
Dash Disassembly
(Figure B) (Figure C)
(Figure A)

99-3527
Kit Assembly
(Figure A) (Figure A)
(Figure B) (Figure B)
DIN radio provision with pocket
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the radio
housing and secure by bending the
metal locking tabs down
. (Figure A)
3. Slide the radio back into the sleeve
until it clicks in. (Figure B)
4.
Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio and climate
controls. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation
.
5. Reassemble the dash in reverse
order of disassembly.
ISO DIN radio provision with pocket
1.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio
2.
Secure the to the ISO brackets
radio with the screws supplied with
the radio. (Figure A)
3.
Slide the radio into the radio
housing until the side clips engage.
(Figure B)
4.
Snap the into the trim plate radio
housing. (Figure B)
5.
Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio and climate
controls. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation
.
6. Reassemble the dash in reverse
order of disassembly.
3
Specyfikacje produktu
Marka: | Metra |
Kategoria: | Niesklasyfikowane |
Model: | 99-3527 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Metra 99-3527, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Metra
13 Stycznia 2025
13 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
11 Grudnia 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Silverline
- Niesklasyfikowane ESUN
- Niesklasyfikowane Michael Todd Beauty
- Niesklasyfikowane MEE Audio
- Niesklasyfikowane Sinbo
- Niesklasyfikowane Monogram
- Niesklasyfikowane NANO Modules
- Niesklasyfikowane TELEX
- Niesklasyfikowane Maxicool
- Niesklasyfikowane REL Acoustics
- Niesklasyfikowane Casa Deco
- Niesklasyfikowane QUIO
- Niesklasyfikowane Parkside
- Niesklasyfikowane Ovente
- Niesklasyfikowane Lec
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025