Instrukcja obsługi Mooer Lofi Machine

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mooer Lofi Machine (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 7 użytkowników na średnio 4.1 gwiazdek

4

9

2

6

3

5

78

1. TRUE BYPASS

Push down the footswitchto toggle

between on and bypass status.

2. ON/OFF LED:

Shows the on/off status of LOFI

MACHINE, when the LED is lit

the effect is engaged.

3. DC IN Power Jack:

For power supply, use a 9-volt

DC regulated AC adapter (plug

polarity is positive on the barrel

and negative in the center).

4. INPUT Jack:

1/4mono audio jack, for”

connecting input device.

5. OUTPUT Jack:

1/4mono audio jack, outputs”

the signal.

Footswitch:

 Wide range sampling rate/depth reducing effects

 3 modes for using guitar, bass, synth or sound player

 Full metal shell

Very small and compact design

 True bypass switch

 DC 9V adapter power supply

Main Features

Sampling Rate Range: 31250Hz~60Hz

Sampling Depth Range: 16Bit~5Bit

Input: 1/4 monaural jack (impedance: 470k Ohms) ”

Output: 1/4 monaural jack (impedance: 100 Ohms)”

Current Draw: 128 mA

Dimensions: 93.5mm (D) 42mm (W) × × 52mm (H)

Weight:160g

Accessories: Owner’s Manual

* Disclaimer: Any specification’s update won't be amended in this manual.

Sample ReducingPedal

7. MIX Knob:

Adjusts the ratio between dry signal and wet signal.

8. SAMPLE Knob:

Adjusts the range of sampling rate reducing.

9. BIT Knob:

Adjusts the range of sampling depth reducing.

PLEASE READ CAREFULLY BEFORE PROCEEDING

Power Supply

Connections

Always turn off the power of this and all other equipment before connecting or

disconnecting, this will help prevent malfunction and / or damage to other devices.

Also make sure to disconnect all connection cables and the power cord before

moving this unit.

Cleaning

Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.

Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents,

cleaning fluids, or chemical-impregnated wiping cloths.

Interference with other electrical devices

Radios and televisions placed nearby may experience reception interference.

Operate this unit at a suitable distance from radios and televisions.

Location

To avoid deformation, discoloration, or other serious damage, do not expose

this unit to the following conditions:

Direct sunlightHeat sources

Magnetic fieldsExtreme temperature or humidity

Excessive dusty or dirty locationHigh humidity or moisture

Strong vibrations or shocks

Please connect the designated AC adapter to an AC outlet of the correct voltage.

Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center

minus. The maximum working voltage shall not exceed 12V, otherwise may be

dangerous equipment damage, fire or other problems.

Unplug the AC power adapter when not using or during electrical storms.

Precautions

FCC certification

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference

that may cause undesired operation.

Power Requirements: AC adapter 9V DC (center minus plug),

recommended to use Mooer Micro Power

6. Mode Switch:

Switch between Synth mode, Guitar

mode, and Bass mode (For connecting:

synthesizer or all kinds of sound player,

guitar, and bass).

Specyfikacje produktu