Instrukcja obsługi Mooer Micro Buffer

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mooer Micro Buffer (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 8 użytkowników na średnio 4.1 gwiazdek

1. TRUE BYPASS Footswitch:

Push down the footswitch to toggle

between on and bypass status.

2. ON/OFF LED:

3. DC IN Power Jack:

For power supply, use a 9-volt

DC regulated AC adapter (plug

polarity is positive on the barrel

and negative in the center).

4. INPUT Jack:

1/4mono audio jack, for connecting ”

guitar.

5. OUTPUT Jack:

1/4” mono audio jack, outputs the signal.

* Disclaimer: Any specification’s update won't be amended in this manual.

Shows the on/off status of Micro Buffer,

when the LED is lit the

effect is engaged.

Full metal shell

Very small and compact design

True bypass switch

DC 9V adapter power supply

Main Features

PLEASE READ CAREFULLY BEFORE PROCEEDING

Power Supply

Connections

Always turn off the power of this and all other equipment before connecting or

disconnecting, this will help prevent malfunction and / or damage to other devices.

Also make sure to disconnect all connection cables and the power cord before

moving this unit.

Cleaning

Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.

Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents,

cleaning fluids, or chemical-impregnated wiping cloths.

Interference with other electrical devices

Radios and televisions placed nearby may experience reception interference.

Operate this unit at a suitable distance from radios and televisions.

Location

To avoid deformation, discoloration, or other serious damage, do not expose

this unit to the following conditions:

Direct sunlightHeat sources

Magnetic fieldsExtreme temperature or humidity

Excessive dusty or dirty locationHigh humidity or moisture

Strong vibrations or shocks

Please connect the designated AC adapter to an AC outlet of the correct voltage.

Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center

minus. The maximum working voltage shall not exceed 12V, otherwise may be

dangerous equipment damage, fire or other problems.

Unplug the AC power adapter when not using or during electrical storms.

Precautions

Buffer Pedal

Accurate copy of the input signal frequency and removal of unconven-

tional signal frequency, which perfectly output the original signal to

the next pedal, resulting in the original musical sound

5

4

3

76

8

8BOOST Knob: . Add up to +6dB of gain to buffered signal.

6. LOW CUT Switch:

When the switch is on, cuts bottom

end frequencies of buffered signal.

7. HIGH CUT Switch:

When the switch is on, cuts top end

frequencies of buffered signal.

Low Cut Frequency: 140Hz

High Cut Frequency: 4.5kHz

Input: 1/4 monaural jack (impedance: 1M Ohms)”

Output: 1/4 monaural jack (impedance: 120 Ohms)”

Power Requirements: AC adapter 9V DC (center minus plug),

recommended to use Mooer Micro Power

Current Draw: 20 mA

Dimensions: 93.5mm (D) 42mm (W) × × 52mm (H)

Weight: 145g

Accessories: Owner’s Manual

FCC certification

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference

that may cause undesired operation.

Equipped with a High-cut & Low-cut switch and a Boost knob, making

the Micro Buffer feature richer and more convenient to use

Specyfikacje produktu