Instrukcja obsługi NAV-TV RGB-LEX+ NTV-KIT062

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NAV-TV RGB-LEX+ NTV-KIT062 (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 5 użytkowników na średnio 4.2 gwiazdek

Questions? Need vehicle-specific wiring information? Tech support available through our toll-free number-

1-866-477-3336

Navigation Screen

(S)

Nav Computer (N)

1.Unplug

FactoryPlug

Male

Female

3.Insert

Male

NAV-TV RGBLEX(+) Back-

Up Camera Interface

Output (S= Screen)

Input (N= Nav drive)

Step 1. Unplug the 10-pin

connector from the back

of the GPS computer.

Step 2. Insert the Male

Factory Navigation plug

into the Female plug of

the RGBLEX(+)

Step 3. Insert the Male 10-pin

connector coming from the

RGBLEX(+) into the back of the

GPS computer.

Note: RGBLEX(+) should only

be plugged into the back of

the Nav. Computer and not

the radio!

A.T.

Note: RGBLEX(+) should only

be plugged into the back of the

Nav. Computer and not the

radio!

1. Red wire must have

accessory power. This is not a

trigger for video input 1. This

is main power for the unit

since it is digital. Connect this

straight from the ignition

harness whenever possible

2. Black wire must have

chassis ground.

3. Blue wire is positive trigger

12v for video input 2 on

RGBLEX+. You may leave the

attached toggle switch off and

connect this wire directly to

the reverse lights for

automatic turn-on in reverse.

Specyfikacje produktu