Instrukcja obsługi PAC LP7-2R
PAC
Niesklasyfikowane
LP7-2R
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PAC LP7-2R (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
1
L.O.C.PRO™ LP7-2R
Line Output Converter with Remote Level Control
Installation Instructions
The professional way to integrate
your new amplier or radio.
General Overview
Install It Right with L.O.C. PRO
™
Don’t cheat yourself out of all the performance your new radio or amplier can deliver. Proper audio line level matching is
critical when replacing your vehicle’s factory (OEM) radio or amplier. It can be the difference between a great sounding
system that you enjoy every day and a buggy, noisy mess that drives you crazy.
PAC L.O.C.PRO™ interfaces have been professionally designed for those who want the very best.
The L.O.C.PRO™ LP7-2R can be used for either replacing an OEM radio and retaining the factory amplied system or adding
ampliers to a system that does not have RCA outputs. L.O.C.PRO™ LP7-2R will also monitor the audio input signal and
automatically create an amplier remote turn-on for systems that do not have one. Level matching is achieved using precision
stereo gain dials and will enable proper adjustment of audio output of the radio for optimum system performance. Differential
inputs also allow for use in OEM BOSE and other premium system scenarios. Included in these instructions are the most common
applications for the L.O.C.PRO™ LP7-2R. For specialty applications not covered in this manual, please visit www.pac-audio.com
for more comprehensive, vehicle specic wiring diagrams. Direct url - www.pac-audio.com/products/locpro
Speaker Level Input to RCA Level Output
Speaker level input to RCA level output is the most commonly used conguration for the LP7-2R.
Use this when you need to create RCA level outputs from a source that only has speaker level outputs.
The RCA input connectors on the main harness will not be utilized for this type of installation, we suggest cutting them off the
harness 3 inches from the RCA end so they can be saved and used for a future installation.After all the connections are made
on the remaining wires, skip to the level adjustment section of this manual.
Cut away RCA ends for wired speaker level inputs
Copyright 2014 Pacic Accessory Corporation. Content subject to change without notice.
Remote 12v + Output (
500ma
)
Constant 12v + Input
Chassis Ground -
Audio Ground Input -
Front Right Audio Input
Front Le Audio Input
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ + + + + + + +
+ + + + + + + + + + +
+ + + + + + + + + + + + + + + + + + + + +
+
+
+
+
+
+
+
+
+
+
+
+
+
+ +
+
+
+
Front Le Output
Front Right Output
(
OPTIONAL
)
Remote Level Control
3"
Note: If using large RCA connectors that are difcult to insert into housing, unsnap the
L.O.C.PRO™ cover and remove end panel insert around RCA outputs.
Speaker Level Input to Speaker Level Output
Speaker level input to speaker level output is most commonly used when replacing an OEM radio and retaining the factory installed ampliers.
Use this when you need to match levels from a source that only has speaker level outputs and an amplier with speaker level inputs. The RCA
input connectors on the main harness will be used for this type of installation, we suggest cutting them off the harness 3 inches from the RCA end
so they can be used for the wired speaker level output. After all the connections are made, skip to the level adjustment section of this manual.
Cut RCA in half from main harness. Then connect to outputs of L.O.C to provide wired speaker lead outputs.
Remote Level Control
Remote 12v + Output (
500ma
)
Constant 12v + Input
Chassis Ground -
Audio Ground Input -
Front Right Audio Input
Front Le Audio Input
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ + + + + + + +
+ + + + + + + + + + +
+ + + + + + + + + + + + + + + + + + + + +
+ + + + + + + + +
+
+ + + + + + + +
+
+
+ + + + + + + + + + + + + + + + + + + + +
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Front Le Output
Front Right Output
(
OPTIONAL
)
3"
Specyfikacje produktu
| Marka: | PAC |
| Kategoria: | Niesklasyfikowane |
| Model: | LP7-2R |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z PAC LP7-2R, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane PAC
28 Grudnia 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
Instrukcje Niesklasyfikowane
- Voltcraft
- Candy
- Ark
- Paladin
- IBEAM
- Sport Dog
- J5create
- Sigma
- McIntosh
- Cilio
- Sensative
- CM Storm
- HQ Power
- Amiko
- Really Right Stuff
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025