Instrukcja obsługi Rossmax Suction Tester

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rossmax Suction Tester (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 5 użytkowników na średnio 4.0 gwiazdek

Instruction Manual

Model: Suction Tester

Portable Testing Device

for Suction unit

www.rossmax.com

Manufacturer: Rossmax International Ltd.,

12F., No. 189, Kang Chien Rd., Taipei, 114, Taiwan

www.rossmax.com

EC Representative: Rossmax Swiss GmbH,

Widnauerstrasse 1, CH-9435 Heerbrugg,

Switzerland

OBM_IB_SuctionTester_

SW_ver2033

Cautions and maintenance

Specications

Power sourceNo need

Operating temperature0 ~ 54ºC

Storage temperature-10 ~ 60ºC

Air ow

scale0~50 L/min

accuracy±4% of full scale

Vacuum

scale0~-76 cmHg

accuracy±2.5% of full scale

Weight730g

Dimension120(L) x 105(W) x 145(H) mm

1. This device should be used with suction unit only.

2. Place the device and suction unit on a at, horizontal surface while in use.

3. Turn the regulator slowly to avoid possible damage.

4. Do not completely unscrew regulator stem.

5. Do not attempt to disassemble the device.

6. Avoid excessive vibration, physical impact and dropping.

7. Do not store the device in direct sunlight, high temperature or humidity.

8. Keep the device away from static electricity.

9. For the rst use, open the rubber vent-plug on the top of vacuum gauge and then

close it after that in order to balance the pressure after the transportation.

OBM_IB_SuctionTester_SW_ver2033.indd 12020/8/13 下午 01:24:25

Specyfikacje produktu