Instrukcja obs艂ugi Shadow SH955 NFX


Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Shadow SH955 NFX (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja by艂a pomocna dla 14 os贸b i zosta艂a oceniona przez 7.5 u偶ytkownik贸w na 艣rednio 4.9 gwiazdek

Strona 1/1
Installation Instruction for SH 955 NFX
Professional Cello Pickup System
Content:Content:
Pickups with shielded cable and 2.3mm plug
Control unit with holder and 6.3mm output jack
3-Volt battery
Fig. 1Fig. 1
Fax: (561) 743 0460
eMail: USA@shadow-electronics.com
Shadow Elektroakustik
Peter-Haendel Stra脽e 2
91334 Hemhofen 路 Germany
Shadow Electronics of America Inc.
17791 Alexander Run
Jupiter, FL 33478 U.S.A.
Fax: +49 - 91 95 - 92 99 30
eMail: info@shadow-electronics.com
Please visit: http://www.shadow-electronics.com
1. Loosen strings, so that the bridge can be raised a few millimeters easily.
2. Lift bridge up. Place pickup between bridge feet and body so that the cable points toward the tailpiece
of the instrument (one pickup per bridge foot).
3. The pickups has to be centered under the feet to guarantee optimized sound transfer. Take care, that
there is no unevenness/roughness (dirt, dust, concavities on top of instrument or bottom of bridge).
4. Tune your instrument.
5. Install control unit between the bridge and the tailpiece. Screw the underside nut of the control unit
off and clamp the center two strings between control unit and plate. Screw nut back on the control
unit.
6. Place supplied 3V battery into control unit. Note correct polarization.
7. Plug pickup-cables into the 2.5mm input jacks of the control unit. Either pickup can plug into either
pickup jack.
8. Connect to appropriate ampli顙塭r with instrument cable.
Pickup
Pickup cables
09-2005


Specyfikacje produktu

Marka: Shadow
Kategoria: Niesklasyfikowane
Model: SH955 NFX

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Shadow SH955 NFX, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮