Instrukcja obsługi Silverline 633838
Silverline
maszyna do lutowania
633838
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Silverline 633838 (2 stron) w kategorii maszyna do lutowania. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.7 gwiazdek
Strona 1/2
633838
GB
Register online: silverlinetools.com
3
GUARANTEE
YEAR
ANS DE GARANTIE
JAHRE GARANTIE
AÑOS DE GARANTÍA
ANNI DI GARANZIA
JAAR GARANTIE
LATA GWARANCJI
silverlinetools.com
Version date: 10.01.2018
FR Fer à souder 60 W
DE Lötkolben, 60 W
ES Soldador 60 W
IT Saldatore 60 W
NL Soldeerbout, 60 W
PL Lutownicagrzałkowa60W
Soldering Iron 60W UK
1
2
3
4
Specication
Voltage:............................................................230V~, 50Hz
Frequency:.....................................................................50Hz
Power:.............................................................................60W
Temperature:........................................................480-520°C
Protection Class:..............................................................
Ingress protection:..........................................................IP20
Product Familiarisation
1. Soldering Tip
2. Heating Element
3. Handle
4. Locking Screw
Introduction
Thank you for purchasing this Silverline product. This manual contains
information necessary for safe and effective operation of this product.
This product has unique features and, even if you are familiar with similar
products, it is necessary to read this manual carefully to ensure you fully
understand the instruction. Ensure all users of the product read and fully
understand this manual.
Technical Abbreviations Key
VVolts HertzHz
~Alternating
current W, kW Watt, kilowatt
A °Ampere Degrees
Specic Safety
Electric Soldering Safety
WARNING: This appliance must be placed on a suitable stand when not in
use
WARNING: Do not hang the soldering iron vertically during use. This will
cause heat to rise, which could make the handle too hot to touch and in
extreme circumstances soften or melt the handle. Allowing the iron to hang
down will also place additional strain on the power cable mounting.
WARNING: Only use soldering iron stands suitable for the wattage of your
soldering iron. Do not use high wattage irons with light small soldering iron
stands.
IMPORTANT: Use soldering irons safely. Use promptly when the soldering
iron has reached the required temperature and switch off immediately after
use.
• Soldering appliances become extremely hot during use. Do not touch
any part of the appliance other than the handle
• Switch ‘OFF’ and allow the appliance to cool completely before
attemptingtochangeanyttings
• Do not leave this appliance unattended whilst hot
• Heat may be conducted to hidden areas or materials near to the work
area.Ensurethattherearenoammablematerialsinthevicinityofthe
work area
• Residual heat may cause waste material to ignite, even after the
appliance has been disconnected from the power supply
• Never use these appliances near any kind of fuel tank or gas cylinder
• Soldering with certain materials may result in toxic fumes. Always allow
adequateventilation.Donotuseinconnedspaces
• Some types of solder may contain high proportions of lead. Molten
lead emits toxic fumes, always wear good quality appropriate breathing
protection
• Lead fumes are especially toxic to children, pregnant women and people
with high blood pressure. People at high risk should not be allowed near to the work area
• Always dispose of waste material responsibly
Intended Use
Electric soldering iron for soldering of larger electronic components, wires
and electrical connections.
Unpacking Your Appliance
• Carefully unpack and inspect your new soldering iron. Familiarise
yourself with all its features and functions.
• Ensure that all parts of the appliance are present and in good condition.
If any parts are missing or damaged, have such parts replaced before
attempting to use this appliance.
Before Use
WARNING: Ensure the appliance is disconnected from the power supply
before attaching or changing any accessories, or making any adjustments.
• CheckthattheSolderingTip(1)issecurelyttedbeforeswitchingon.
The soldering tip should be pushed into the Heating Element (2) and
secured by tightening the Locking Screw (4)
Operation
Note: ALWAYS wear eye protection, adequate respiratory and hearing
protection, as well as suitable gloves, when working with this appliance.
• Do not allow the heating element or soldering tip to rest on any surface
that may be damaged by heat
• To operate, connect to mains power supply and allow to reach operating
temperature
• Hold the Soldering Tip (1) against the wire or component to be soldered.
Once hot, add solder to the joint then remove soldering iron
Accessories
• A range of accessories and consumables, including soldering iron tips is
available from your Silverline stockist
• Spare parts can be obtained from toolsparesonline.com
Maintenance
General inspection
• Regularlycheckthatallthexingscrewsaretight
• Inspect the supply cord of the appliance, prior to each use, for damage
or wear. Repairs should be carried out by an authorised Silverline
service centre. This advice also applies to extension cords used with this
appliance
Tip Replacement
WARNING: Always disconnect appliance from power supply and allow to
cool fully before attempting to adjust or replace any part.
• Slacken the Locking Screw (4) and withdraw the Soldering Tip (1)
• Push the replacement soldering tip into the Heating Element (2) and
retighten the Locking Screw
Cleaning
• Keep your appliance clean at all times. Dirt and dust will cause internal
parts to wear quickly, and shorten the appliances’ service life. Clean the
body of your appliance with a soft brush, or dry cloth. If available, use
clean, dry, compressed air to blow through the ventilation holes
• Clean the appliance casing with a soft damp cloth using a mild
detergent. Do not use alcohol, petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
Contact
For technical or repair service advice, please contact the helpline on (+44)
1935 382 222
Web: silverlinetools.com/en-GB/Support
Address:
Powerbox
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of appliances that are
no longer functional and are not viable for repair.
• Do not dispose of appliances, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the correct
way to dispose of appliances
Specyfikacje produktu
| Marka: | Silverline |
| Kategoria: | maszyna do lutowania |
| Model: | 633838 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Silverline 633838, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do lutowania Silverline
21 Września 2024
15 Września 2024
2 Września 2024
1 Września 2024
30 Sierpnia 2024
29 Sierpnia 2024
29 Sierpnia 2024
28 Sierpnia 2024
26 Sierpnia 2024
24 Sierpnia 2024
Instrukcje maszyna do lutowania
Najnowsze instrukcje dla maszyna do lutowania
11 Stycznia 2025
5 Stycznia 2025
4 Stycznia 2025
4 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025