Instrukcja obsługi StarTech.com MCM110ST2EU

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com MCM110ST2EU (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.0 gwiazdek

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL:Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 02/10/2012

For the most up-to-date information, please visit: www.startech.com

MCM110SC2 / MCM110SC2GB / MCM110SC2EU

MCM110ST2 / MCM110ST2GB / MCM110ST2EU

10/100 Ethernet to Multi Mode Fiber Media Converter SC 2km

*actual product may vary from photos

Packaging Contents

• Fiber/Ethernetmediaconverter

• PowerAdapter

• InstructionManual

System Requirements

• 10/100Base-TXcompatibleEthernetnetwork

• 100Base-FXbernetwork

• SCmulti-modebercable

• AvailableACelectricaloutlet

Installation

1. ConnecttheEthernetcabletotheFiberMediaConverter“LAN”port.

2. ConnecttheotherendoftheEthernetcabletotherouter/switch/

computerNIC.

3. Connectthebercableintotheberreceptacleonthemediaconverter.

4. Plugtheprovidedpoweradapterintothemediaconverter,and

intoanavailableACpoweroutlet.

5. Connecttheotherendofthebercableintotherouter/switch/

computerNIC/anothermediaconverter.Remembertoreverse

theTXandRXleadsbetweenthetwodevices.

DIP Switch Settings

Switch FunctionStateStatus

SW1 UTPMode Auto AutoUTPdetection

Manual UsemanualUTPsettings

SW2* UTPSpeed

100 100Mbpslinkspeed

10 10Mbpslinkspeed

SW3* UTPDuplex Full Fullduplex

Half Halfduplex

SW4 LinkFaultPass-

through

LFP LFPmodeo

ON LFPmodeon

*not enabled when SW1 set to ‘Auto’

LED Indicators

LEDFunction StateStatus

PWR Power

Indicator

ON Converterhaspower

OFF Converterhasno

power

FXLink/Act FiberLink/

Activity

ON FiberlinkOK

OFF Nolinkdetected

Flashing Receivingdata

FEF FarEndFault ON Farendlinkfailure

OFF Nofailuredetected

100 Mode

ON 100Mbps

OFF 10Mbps

Full DuplexMode

ON Fullduplexmode

OFF Halfduplexmode

TXLink/Act EthernetLink/

Activity

ON Ethernetlink

detected

OFF Nolinkdetected

Flashing Receivingdata

*MCM110ST2 shown

Specyfikacje produktu