Instrukcja obsługi StarTech.com USB2001EXT2NA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com USB2001EXT2NA (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 3 użytkowników na średnio 4.2 gwiazdek

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: April 27, 2020 1:52 PM

Product Diagram (USB2001EXT2NA)

Front

Rear

Component Function

1LEDs (Local/Remote)

Power:

• Solid Blue:Extenders The are receiving power.

Link:

• Solid Green:Extenders The are linked.

• O: Extenders The are not linked.

Host:

• Solid: Extender Host Computeris linked to the .

• Flashing: Extenders are in suspend mode.

Activity:

• Flashing: Extenders Data is transmitted between .

• O: Extenders are in a suspended mode.

1 Port USB 2.0 Extender over Cat5e, Cat6, or Cat7 | Up to 330 ft. (100 m) | North America

2USB-A Port• Used to connect a (mouse, keyboard, USB Device

etc.) to the .Remote Extender

3USB-B Host Port• Used to connect the to the LocalExtenderHost

Computer, USB Cable using the(included).

4RJ45 Port - Link(Local/

Remote)

• Used to connect the to the Local ExtenderRemote

Extender.

• Max. data transfer rate = 480Mbps

5Power Port (5V DC)

• Used to connect the to Remote ExtenderAC

Electrical Outlet, Power Adapter using the

(included).

Requirements

For the latest requirements, please visit www.startech.com/USB2001EXT2NA

• USB Enabled Host Computer

• Solid Core Cat5e unshielded twisted pair (UTP) or greater

Installation

1. Position the near the .Local ExtenderHost Computer

2. Position the near an .Remote ExtenderAC Electrical Outlet

3. Connect a (or better) to the on the and the Cat5e CableRJ45 PortLocal Extender

other end to the on the .RJ45 PortRemote Extender

Note: The cannot go through any networking equipment (router, Cat5e Cabling

switch, etc.).

4. Connect the (included) to the on the USB CableUSB-B Host PortLocal Extender

and the other end to a USB port on the .Host Computer

5. Connect the (included) to the on the Power Adapter Power PortRemote Extender

and the other end to an .AC Electrical Outlet

6. Connect a to the on the .USB DeviceUSB-A PortRemote Extender

1 23

4 5

Specyfikacje produktu