Instrukcja obsługi SurgeX SX-N240


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SurgeX SX-N240 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.6 gwiazdek

Strona 1/2
Installation Instructions
SX-N240
Line Connection
CAUTION: The SX-N240 is designed for use with 20 Amp 208 Volt two-phase
services or 20 Amp 240 Volt split-phase services only. That is, services with
two hot wires (or phases), a neutral wire, and a ground wire. A neutral must
The SurgeX SX-N240 product is rated at a load capacity of 20 Amps per leg and
shall be wired only by qualied Electricians using 12 Ga. conductors as specied
in Article 310 of the 1999 National Electric Code, as set forth in Table 310-13.
Any type of conductor suitable for use in wet or dry locations such as (but not
limited to) THHN, THHW, THW, THWN, or TW shall be considered acceptable
if local Code permits. The service to which the product is connected must be
protected by a dual 20 Amp circuit breaker.
Connect the wires from the electrical service (line) to the upper terminal block
labeled ‘ as follows:Line
The two phases or hot wires to the two terminals 120V
The White wire to Neutral
The Ground wire to Ground


Specyfikacje produktu

Marka: SurgeX
Kategoria: Niesklasyfikowane
Model: SX-N240

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SurgeX SX-N240, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane SurgeX

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025