Instrukcja obs艂ugi Techno Line MA 10660


Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Techno Line MA 10660 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja by艂a pomocna dla 19 os贸b i zosta艂a oceniona przez 10 u偶ytkownik贸w na 艣rednio 4.4 gwiazdek

Strona 1/2
Quick reference
MA10 0 wind 66
sensor
MOBILE-ALERTS Sensor
This is a sensor for the "MOBILE-ALERTS" system, it
can be used with this system only. To use the sensor
you need a MOBILE-ALERTS gateway.
Quick Setup
Remove the plastic foil from the solar panel (1) on the
sensor. The wind sensor must be installed with the front
of the sensor (the solar panel) facing true South, or the
reported wind direction will not be accurate Secure the .
main unit to the shaft of the mast holder (2). Use the
right-angle adaptor (3) if the wind sensor will be
mounted on a horizontal mast or surface. Fasten the
mast holder to a suitable mast using the two U-bolts,
washers and nuts included. Mount the wind sensor onto
a mast so the wind can reach the sensor unobstructed
from all directions for an accurate reading. The ideal
mast is between 15.75 mm and 33 in diameter. mm
The wind sensor DOES NOT have replaceable
batteries, it consumes solar power and charges the
internal battery pack automatically
Add Sensor
Open the app, dashboard is displayed. Tap "Add new
sensor" and scan the QR code on the base of the wind
sensor. Then set a name for the sensor.


Specyfikacje produktu

Marka: Techno Line
Kategoria: Niesklasyfikowane
Model: MA 10660

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Techno Line MA 10660, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮




Instrukcje Niesklasyfikowane Techno Line

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025