Instrukcja obsługi TP-Link TL-SG2016P

TP-Link Niesklasyfikowane TL-SG2016P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link TL-SG2016P (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 3.7 gwiazdek

Pobierz PDF

Strona 1/2

JetStream Gigabit Smart PoE+ Switch

1. To access the management page of the switch, open a browser and type

the switch’s IP address in the address eld, then press the Enter key.

If the switch obtains IP address from the DHCP server (typically a router), nd

the switch’s IP address on the DHCP server.

If not, use the default IP address to launch the switch’s 192.168.0.1

management page.

Note: Make sure the switch and computer are in the same subnet.

2. admin Enter for both the username and password in the lower case letters

to log in. The rst time you log in, change the password to better protect

your network and devices.

3. After a successful login, the main page will appear. You can click the menus

on the top side and left side to congure the corresponding functions.

Note:

1. PoE ports can also connect to non-PoE devices, but only transmit data.

2. Maximum PoE power is 30 W for each PoE port, and 62 W (for TL-SG2008P)/61 W (for TL-SG2210P)/120W (for TL-SG2016P) for all PoE ports.

3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.

Installation Guide

Conguration

Connection

For the detailed congurations, refer to the User Guide and CLI Guide. The

guides can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Method 1: Standalone Mode

Switch PC

In Standalone Mode, use a computer to congure and manage the switch.

The switch supports two conguration methods:

Standalone Mode: Congure and manage the switch singly.

Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as

access points, switches, and gateways.

Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our

ocial website: https://www.tp-link.com/support/download/.

For simplicity, we will take TL-SG2210P for example throughout the Guide.