Instrukcja obsługi Waterco Trident Ultra

Waterco Niesklasyfikowane Trident Ultra

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Waterco Trident Ultra (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 29 osób i została oceniona przez 15 użytkowników na średnio 4.2 gwiazdek

Strona 1/2
www. .com.aumaytronics /99996214-TRI
Quick start guide
Unplug the power supply before servicing.
Do not pull the Pool cleaner from the pool
using the cable.
Use the Pool Cleaner in the following water
conditions only: Chlorine Max 4 ppm;
pH 7.0 - 7.8; Temperature 6 -34°C (43-93°F);
NaCI Maximum = 5000 ppm.
Specifications:
Motor protection: IP 68
Minimum depth: 0.80m/2.6ft
Maximum depth: 5m/16.4ft
Use the originally supplied power supply only.
Do not use an extension cable in any case
whatsoever.
Ensure the electrical outlet is protected by
a ground fault interrupter (GFI) or an earth
leakage interrupter.
Keep the power supply out of standing water.
Do not enter the pool while the Pool Cleaner
is working.
When working, the Power Supply should be
placed in the shade.
If the pool robot is fitted with combined or
wonder brushes, gently aqueeze the brushes
until they are soaked with water.
Release minimal required floating cable
length to ensure proper pool coverage. Leave
excess cable rolled outside the pool.
Trident ULTRA
Thank you for purchasing a Robotic Pool CleanerTrident .
The Robotic Pool Cleaners deliver advanced cleaning technologies, long lasting
performance and easy maintenance. You and your family will be free to enjoy
swimming with full confidence that your pool is completely clean.
After each cleaning cycle wash the filter bag or
cartridge. Clogged filter bags reduce scanning
and cleaning efficiency.
Once a week unplug the cable from the power
supply, unwind the tangled portions of the
cable, straighten it out and leave it in the sun
for several houres.
Store the pool cleaner in a shady place on
its Caddy, if not on a caddy, place the pool
cleaner upside down.
Cautions & Warnings
Helpful hints
Caddy Assembly
DIN 127B A2 M5 x 2
2
3
5
7
2
4
4
DIN 1587 A2 M5 x 2
3
WN 1412 A2 KA50X16 x 6
4
DIN 7985 A2 M5X35 x 2
1
4a 4b
A
B
A
B
1
2
3
3
2
1
6
8
1
9
B
A
8mm (5/
16”)
4
4
4
www. .com.aumaytronics /99996214-TRI


Specyfikacje produktu

Marka: Waterco
Kategoria: Niesklasyfikowane
Model: Trident Ultra

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Waterco Trident Ultra, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Waterco

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025