Instrukcja obsługi B.E.G. LC-plus 280
B.E.G.
Niesklasyfikowane
LC-plus 280
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla B.E.G. LC-plus 280 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 11.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
60˚
2
1
1
2
2
1
LUXOMAT
®
LC-plus 280
1
2
3
LUXOMAT
®
IR-LC-plus
3
1:4
1.
0.5
0.25
Futura Book 24Pt
> 1m
4
1 2
1
2
T
15s
1
2
4
6
8
16
10
12
30s
1
2
1
3
2
RESET
TE S T
PARTY
COMFORT
LUXOMAT
®
IR-RC mini
IR-LCmini
TEST
16
12
84
15s 30s
1
1,5 2 3 5 6 7 10
200°
280°
16 m
16 m
Operating and mounting instructions for motion detector LUXOMAT
®
LC-plus 280
5. Putting into operation / Settings
1)
Caution: have all work involving the 230V
mains supply carried out by a qualified elec-
trician! Before starting disconnect the mains!
Please be aware, that the LUXOMAT
®
LC-plus
280 is not suitable as an intrusion detector,
since it is not equipped with a tamper contact.
2) Socket base corner mounting
Important: The LUXOMAT
®
LC-plus 280 has
to be mounted in such a way, that the adjusting
elements/rotary regulators are always pointed
downward.
1) Wall mounting
2) Outside corner mountable with plug-in
socket (included)
1) Connection cable from top down
2) Connection cable from below
3) Terminal markings
(Wiring diagrams see point 16)
1) Press here for separation of terminal case
and plug-in socket
2) Mount the plug-in socket with two screws
and the enclosed seal rings on a firm base
(Pay attention to inserting of the connection
cable, see point 4)
Follow-up time
Test operation, 15 sec. ... 16 min., Pulse operation
(Test operation: range testing, detector switches
on/off the lighting at any recognized movement)
Lux value
Night operation...Dusk...Day operation
(Day operation: light sensor inactive, switching at
any brightness value)
On delivery the potentiometers are adjusted in
position “TEST” and “SUN” symbol (daytime
operation). With this adjustments the following
regular values are active:
Follow-up accommodation: 3 min.
Lux value: approx. 20Lux
Reset: The adjusting into “Factory settings” from
any other position causes a “Reset” of the device.
That means all parameters are resetted into factory
settings (fast LED-flashing).
LED Functional display
Slow flashing: EEPROM empty
Fast flashing: EEPROM is written
During the self-testing cycle, the LUXOMAT
®
LC-plus
280 will only react to commands “RESET” and
“LIGHT OFF”
1) If possible mount unit on a safe place
(wall or ceiling mount).
2) Influence of weather reduces the lifetime of
the unit. Please take care to mount correctly.
3) Minimum distance to switched lighting,
frontally or laterally to device: 1m
4) Never mount the connected lights below the
motion detector!
1)
LUXOMAT
®
IR-LC-plus (accessory, see point 20)
2)
LUXOMAT
®
IR-LCmini (accessory, see point 20)
Caution: Settings with remote control subscribe
the settings by courtesy of potentiometers (see
point 5) (for description see point 12).
1. Mounting preparations 2. Mounting types
4. Inserting of the connection cable
9. Exclude sources of interference
10. Mounting place
3. Plug-in socket
11. Settings of remote control
8. Sensitivity adjustment (mounting height 2.50 m);
mounting height min. = 2.00m
(Sensor head justified horizontally, see point 7)
1) Range walking across: approx. 16 m
2) Range walking towards: approx. 9m
3) Anti-creep: approx. 2 m
7. Sensor head optics
Self test cycle
After mounting and connecting the 230VAC supply
voltage, the LED flashed for 1min. to show a self testing
unit. Then the unit is ready for operation and the set-
tings can be made manually or with remote control
(see point 11).
6. Factory settings
Follow-up time Lux value
By swinging the sensor head horizontally
(approx. ±45°) and vertically (approx. ±15°)
the detection area can be changed.
1) Blind for limiting creep-under protection
and backward detection
2) Blinds for reduction of far-away and
close-by areas by 60° each
3) Blinds for reduction of far-away areas by
60° each
2 m
9 m
16 m
280°
20 m
2,50 m
GB
& “TEST”
14
12
Test operation
Switches the light ON/OFF when
movement is detected.
Unlocking device
Lux value: Day operation
light sensor inactive, switching
at any brightness value
Lux value: approx. 100Lux
Onset of dusk
Lux value: approx. 25Lux
Advanced dusk
Lux value: approx. 2Lux
Darkness
Automatic reading in the
current light value
Individual light value
2 - 2500Lux
Impulsfunction
1)
1sec. ON, 9 sec. OFF
Follow-up time
15sec. up to 16min.
Vacation- and comfort function
Switching ON/OFF
On: By achieving the Lux value
1 hour daylight independent
of movements, then normal
operation (switching time
changeable, see point 15)
Vacation- and comfort function
Switching ON/OFF
On: By achieving the Lux value 1 hour
daylight independent of movements,
then normal operation (switching time
changeable, see point 15)
Alarm function
Switching ON/OFF,
(ON for 30sec., OFF for
1sec., then normal operation)
Walk test
Switching ON/OFF
Sensitivity adjustment
~ +15%, ~ –30 %
Light OFF
Switches the light ON again when
movement is detected.
Reset
Erasing of all of the values set
using the remote control. (Then
potentiometer-settings active,
see point 5)
Light ON for 12 h
2)
/ Light OFF for 12 h
By pressing once the party button, the
light is switched on for a period of 12
hours. By pressing the party button twice,
the light remains switched off until the
next evening (see point 14).
Double lock devise (sabotage
protection)
Keep the button pressed while LEDs
flash. As soon as the LEDs are on
permanently, the double-locking is
active.
Reset
Light OFF, then automatic mode
Light ON for 12 h / Light OFF for 12 h
By pressing once the party button, the
light is switched on for a period of 12
hours. By pressing the party button
twice, the light remains switched off
until the next evening (see point 14).
Power supply: 230V~ ±10 %
Switching power: 2000 W, cosϕ= 1
1000 VA, cosϕ = 0.5
Range: approx. 16m
Time settings: Impuls, 15 sec. - 16 min.
Photo electric switch: approx. 2 - 2500Lux
Factory settings: follow-up accommodation
3 min., photo electric
switch approx. 20 Lux
Detection area: 280°, 360° anti-creep
protection
Degree of protection/class:
IP44 / II
Dimensions: L 110 x W 68 x H 78mm
Material:
UV-stabilised Polycarbonate
Mounting types: wall and outside corner
mountable with included
plug-in socket
Inserting of the connection cable:
once from top down and
from below
Range adjustment:
> Swivelling of the sensor head: vertically
(approx. ±15°), horizontally (approx. ±45°)
> With blank out clips (included)
Electrical adjustments: in traditional manner
with potentiometers valid for time and Lux value
only, with infrared remote control.
12. Functions of LUXOMAT
®
IR-LC-plus
18. Technical data16. Wiring diagrams13. Functions of LUXOMAT
®
IR-LCmini
Lock device (by pressing the button
shortly)
Reset
Light OFF, then automatic mode
17. Dimensions (mm)
14. Activation “Light OFF”
Because of the sabotage protection the function
“Light off” is deactivated in the factory. When
required it must be activated again:
1. Mains to be disconnected
2.
Mains to be connected - a self test cycle
of 60sec. starts (the LED is flashing, see
point 5).
3.
Activation/deactivation of the function “Light
Off” can be done only during the self testing
cycle
For a
ctivation of the function “Light OFF”
the button “Light OFF” must be pressed
during the self testing cycle (the LED will
flash quickly).
For deactivation “Light OFF” the button
“Reset” must be pressed during the self
testing cycle (the LED will flash slowly).
Caution: The implementation of “Reset” with po-
tentiometers (see point 6) or with remote control
(see point 12) does not influence the activation/
deactivation of the function “Light OFF”
15. Vacation- and comfort function
The duration of the on-period can be adjusted:
1. “Unlock” unit with remote control
2. The button “Co“ to be operated. The LED
flashes for 10sec.
3. During these 10 seconds the duration of the
light-on period can be selected: from e.g.
15sec. = 15 min. up to 16min. = 16 hrs.
4. The unit to be locked with the button “Lock”.
5. “Vacancy/Comfort” is activ now (deactiva-
tion see point 12)
Caution: If the “Vacation- and comfort function”
is active or with lower deviation of the Lux value
the LC-plus turns on the light again after a time
delay of 60 sec.
LUXOMAT
®
Motion detector:
LC-plus 280 white: 91008
brown: 91018
black: 91028
silver: 91048
LUXOMAT
®
Remote control:
IR-LC-plus (incl. wall bracket) 92095
IR-LCmini 92093
Accessory:
Arc extinction kit 10880
19. Article / Part nr. / Accessory
Standard operation
(with optional arc extinctions kit)
Optional extension for switching of parallel
inductors, rocker switches, fluorescent lamps etc.
L
N L’
RC
Terminal connection for parallel operation
We recommend max. 5 motion detectors.
L
N L’
L
N L’
Permanent light operation with external push
button
Additionally manuel switching is possible. The
NC-contact is to press for approx. 0.5 - 2 sec.
L
N L’
Permanent light operation with external switch
Switching is manually possible (permanent light
operation). Caution: Light has to switched off
manually.
L
N L’
MAN 5884– 230714 – 2
Test operation
Switches the light ON/OFF when
movement is detected.
Light OFF
Switches the light ON again when
movement is detected.
78
68 42
528 8
49.5 13
L N L'
1)
As soon as the function “Chime/
Impulse” is activated, the following
functions will be blocked: Alarm
function, Light ON for 12 hrs / Light
OFF for 12 hrs, Vacation- and comfort
function
2)
Light ON for 12 h can also be activated
by disconnection mains twice within
2 - 4 sec.
PARTY
COMFORT
Specyfikacje produktu
| Marka: | B.E.G. |
| Kategoria: | Niesklasyfikowane |
| Model: | LC-plus 280 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z B.E.G. LC-plus 280, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane B.E.G.
3 Października 2024
3 Października 2024
Instrukcje Niesklasyfikowane
- Luxli
- Phanteks
- Yamaha
- GoGen
- Vicoustic
- Blebox
- Leap Frog
- Comar
- Hauck
- Comfortisse
- Mamiya
- Camille Bauer
- EQ-3
- Tellur
- Steelbody
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025