Instrukcja obsługi CTA Digital PAD-LEDPARAF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CTA Digital PAD-LEDPARAF (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 5 użytkowników na średnio 5.0 gwiazdek

Premium Floorstand with LED Light Add-On

for 9-11" Tablets

PAD-LEDPARAF

INSTRUCTION - MANUAL

CONTENTS:

718-963-9845

INSTALLATION:

1. Assembling floorstand base:

3. Attaching enclosure to VESA plate:4. Inserting tablet into enclosure:

1A. Allign the holes on the sntad (A) with holes on the base (B) and turn in

screws (M) with provided allen tool (J) until securely tightened. Shown above.

2B. When the cable reaches the

bottom of the stand, pull through the

hole at the stand back and remove

the weighted pendant as shown.

2A. To route a charge cable through

the stand, attach the weighted

pendant to your charge cable, then

pass through the cutout at the top of

the stand.

3A. Align enclosure (C) VESA holes to VESA plate holes in stand (A) and from the

front of enclosure turn in screws (L) into the threaded VESA holes with provided

allen tool (I) until securely thigtened. Shown above.

4A. Find the appropiate size foam padding (K) for the tablet you wish to use.

Make sure device is compatible for the enclosure. if having power/data cord

attached to tablet, slide it through the back of the foam as shown and out the

opening in the back.

**Tablet for illustration only,

NOT INCLUDED

M5 x 10

x4

M6 p1-x4

2. Cable routing:

K

K

C

C

A

I

A

B

M

J

L

x2

D

LED Bars

E

x1

F

x1

G

x1

H

x1

I

x1

M5 Allen Key

M5 x 10

L

x4

x1

N

J

x1

M6 Allen Key

M

x4

M6

K

x1

x1

C

x1

A

B

x1

Specyfikacje produktu