Instrukcja obsługi ILive ISB13
ILive
Niesklasyfikowane
ISB13
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ILive ISB13 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 13 użytkowników na średnio 4.3 gwiazdek
Strona 1/2
International Support
To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently asked
questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en Inglés,
Español y Francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en Anglais,
Espagnol ou Français, ou pour obtenir des réponses
à des questions fréquemment posées, consultez la
rubrique d’assistance sur:
www.iLiveElectronics.com
Contact Information
Website: www.iLiveElectronics.com
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the most
up-to-date version of this User’s Guide, go to:
www.iLiveElectronics.com.
Protect for Today
Sustain for Tomorrow
Made
Green
Specications are subject to change without notice.
Copyright © 2023 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property
of their respective owners.
TF/Micro SD/USB
1. Load a TF, MicroSD memory card, or USB drive
into the appropriate media port.
2. The speaker will automatically switch to SD
mode or USB mode.
3. Use the controls on the speaker to select and
play audio from the connected drive.
FCC WARNINGS
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
ADDITIONAL WARNINGS
• WARNING: To prevent re or shock hazards, do not expose
this unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
• Lithium batteries, like all rechargeable batteries, are
recyclable and should be recycled or disposed of according to
state and local guidelines. They should never be disposed of in
normal household waste and they should never be incinerated,
as they might explode. Contact your local government for
disposal or recycling practices in your area.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California
to cause cancer and birth defects or other reproductive
harm. For more information go to: www.P65Warnings.
ca.gov. This product meets and complies with
required Federal product guidelines.
Orb Wireless Speaker
User’s Guide for Model ISB13 v3034-01
ControlsFeatures
• Bluetooth wireless 5.0: range approximately 60 ft.
• MicroSD card port
• Digital volume control
• LED glow ring
• Built-in rechargeable battery: approximately 3 hrs of
playtime at 50% volume
• Micro-USB port for battery recharge
Charging the Battery
To charge the internal battery, plug the USB charging
cable into the DC Power Input on the speaker and
a powered-on computer or UL certied USB power
adaptor (not included) and standard power outlet.
Charging time is approximately 120 minutes.
When the battery is low, a voice will announce “Low
battery,” then the unit will power o. While the battery
is charging, the LED Indicator will turn a solid red.
After the battery is fully charged, the LED Indicator
will turn o.
Pairing & Playing Bluetooth Audio
1. When powered on, the speaker will enter
Bluetooth Mode automatically. If you are playing
from a dierent source, press the button Mode
to select Bluetooth Mode.
2. Using the Bluetooth setting on your device,
search for new devices and select . ISB13 Refer
to the user’s manual for your specic device for
instructions on pairing and connecting Bluetooth
devices.
3. When successfully paired, a voice prompt will
announce the connection.
4. Use the controls on the connected device to
select and begin playing audio. Use the controls
on the speaker or the connected device to play,
pause, and adjust volume.
Note: If your device becomes unpaired or it is unable
to connect, press and hold the button for 3 Play
seconds to enter pairing mode. A voice prompt will
announce “Bluetooth is connecting” start from step
two to connect to your device.
MODE
+
–
1
3
2
Inputs
Includes
• User’s Guide
• Micro-USB to USB charging cable 1. Mode: Press to change source modes to
Bluetooth, USB, or MicroSD/TF.
2. Vol -/Previous: Press to decrease volume level.
Press and hold to play the previous track.
3. Lights: Press repeatedly to cycle through LED
light settings. Press and hold for 5 seconds to
turn Voice Prompts on/o.
4. Play/Pair: Press to play or pause music tracks.
Press and hold for 3 seconds to disconnect
Bluetooth device and enter pairing mode.
5. Volume+/Next: Press to increase volume
level. Press and hold to play the next track.
6. USB Port
7. TF/MicroSD Slot
8. Power on/o
9. LED Indicator
10. DC In Port
7
6
98
5
Notes on Bluetooth
• The speaker will automatically connect to the last
paired device when powering on.
• The speaker can only pair with one Bluetooth
device at a time.
• To disconnect from one device and connect to
another, press and hold the button for 3 Play
seconds to enter pairing mode.
4
10
Specyfikacje produktu
| Marka: | ILive |
| Kategoria: | Niesklasyfikowane |
| Model: | ISB13 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ILive ISB13, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane ILive
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Petkit
- Niesklasyfikowane Petsafe
- Niesklasyfikowane Cube Controls
- Niesklasyfikowane ASA
- Niesklasyfikowane Warner Bros
- Niesklasyfikowane Siemens
- Niesklasyfikowane SRS
- Niesklasyfikowane Dension
- Niesklasyfikowane Welltech
- Niesklasyfikowane Titanwolf
- Niesklasyfikowane Fuzzix
- Niesklasyfikowane EA Elektro Automatik
- Niesklasyfikowane REV
- Niesklasyfikowane Ambient Weather
- Niesklasyfikowane Astell&Kern
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025