Instrukcja obsługi Schneider SRVSRK1

Schneider Niesklasyfikowane SRVSRK1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Schneider SRVSRK1 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 5.0 gwiazdek

Pobierz PDF

Strona 1/6

Important Safety Information

Read the instructions carefully and look at the equipment to become familiar

with the device before trying to

install, operate, service or maintain it. The

following special messages may appear throughout this document or on

the

equipment to warn of potential hazards or to call attention to information that

claries or simplies a procedure.

The addition of this symbol to a Danger or Warning product

safety label indicates

that an electrical hazard exists that will

result in personal injury if the instructions are

not followed.

This is the safety alert symbol. It is used to alert you to potential

personal injury

hazards. Obey all safety messages that follow

this symbol to avoid possible injury or

death.

DANGER

DANGER will result inindicates a hazardous situation which, if not avoided, death or serious injury.

WARNING

indicates

ha ardouz s

situation

which,

not

avoid ,ed

coul r ultd es

death

serious

injury.

CAUTION

i icatesnd

hazard sou

sit tionua

which,

not

avoi ,ded

c l r ultou d es

mi rno

m teodera

injury.

NOTICE

used

address

practices

not

physical

injury.

Installation Guide

Rail Kit for Easy UPS On-Line Rack-mount Series

Rail Kit for Easy UPS On-Line Rack-Mount Series

Product Description

These rail kits are ideal for mounting rack Easy UPS in a rack. These rail kits can support equipment measuring up to

16.75" (43cm) to 17.7" (45cm) wide. SRVSRK1 can support equipment with a maximum weight of 60kg and

SRVSRK2 can support up to 100 kg.

Package Contents

The packaging is recyclable; save it for reuse or dispose of it properly.

SRVSRK1

(1)

Left rail silder

(1)

Right rail silder

(1)

User manual

(6)

Cage nut

(4)

Fixing stud

(8)

M6 Screws

SRVSRK2

(1)

Left rail silder

(1)

Right rail silder

(1)

User manual

(6)

Cage nut

( ) 14

M6 Screws

Rail Kit for Easy UPS On-Line Rack-Mount Series

Installation

Install SRVS RK1

Please follow below steps to install SRVSRK1.

1. Insert 4 pieces of xing nuts into the following locations of rail sliders. Be sure x them rmly. Then, pull apart

two ends of rail sliders and place them in a chassis. Be sure the pulling distance meets the depth of rack chassis

and place xing studs to the corresponding holes on supporting columns. For example, if depth of rack chassis is

700mm, please pull the length of rail sliders is 700mm.

2. Use 4 pieces of M6 screws to mount rail sliders into chassis. See below chart.

3. According to UPS height, put 6 pieces of nuts on proper location.

Fixing stud

M6 screws

Cage nuts x 3

Specyfikacje produktu

Marka:	Schneider
Kategoria:	Niesklasyfikowane
Model:	SRVSRK1
Kolor produktu:	Srebrny
Wysokość produktu:	42.6 mm
Szerokość produktu:	41.4 mm
Głębokość produktu:	700 mm
Waga produktu:	1440 g
Szerokość opakowania:	95 mm
Wysokość opakowania:	55 mm
Głębokość opakowania:	500 mm
Ilość na paczkę:	1 szt.
Waga wraz z opakowaniem:	1660 g
Model:	Szyna do stojaka