Instrukcja obsługi Hager JF130VMF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hager JF130VMF (1 stron) w kategorii licznik elektryczności. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 9 użytkowników na średnio 4.0 gwiazdek

Hager Ltd. Hortonwood 50, Hortonwood, Telford, TF1 7FT / 01952 675 67

1

Metering

Meter Voltage Supply Cables

Metering

Voltage supply Cables with

Fuses

For the supply to the panel Mounted meters or

DIN rail pluggable Meters in the Panel board

meter enclosure range.

The voltage to meter fuse packs consist of a 1500mm cable set that will

have the ring terminals terminated on the main phases L1, L2, L3 and

Neutral of the busbar system in either the JN or JF panel board.

The fuse carriers consist of 4 fuses rated at 3A 250V suitable for the

connection of up to 36 meters, the fuses are mounted on a short section of

din rail that can be mounted in the most convenient position in the panel

board chosen.

The opposite side of the fuse is the pluggable cable to connect into the first

meter (voltage in) and then can be daisy chained into other meters if

required using the meter to meter supply cables listed online or in the

commercial catalogue.

JN130MF with M8 ring terminals for use with the 250A JN panel boards.

JF130MF with M12 ring terminals for use with 400A to 800A panel boards.

Description Cat ref.

1.5M Voltage Supply Cable With Fuse Carrier (For JN Meter Enclosure System)JN130VMF

1.5M Voltage Supply Cable With Fuse Carrier (For JN Meter Enclosure System)JF130VMF

For use in the Panel board meter enclosure system

Specyfikacje produktu