Instrukcja obsługi AMX HPX-900
AMX
Niesklasyfikowane
HPX-900
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX HPX-900 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.8 gwiazdek
Strona 1/2
QUICK START GUIDE
HPX-600/900/1200 6, 9,12 Module Connection Ports
Overview
The HPX-600/900/1200 family of HydraPort Connection Ports (FG560-xx-cc) are built
to accommodate the diverse connection needs of conference and meeting room
visitors. The HPX-600/900/1200 are designed to be mounted into a horizontal surface
such as a conference room table or lectern in order to provide connectivity for power,
networking, Audio/Video and control.
Specific connectivity is accomplished by populating the HydraPort Base Assembly with
various modules.
AMX offers 6 versions of the HPX-600/900/1200 HydraPort Base Assemblies with a
variety of compatible modules:
ATTENTION: Only a professional, AMX-qualified installer should perform this installation.
Installation must conform to all local codes. This product may not be installed by the
end-user.
Accessories
Hydraport Base assemblies come with the following accessories:
• Two Table spacers (for use in tables 0.5 - 0.75" thick) with adhesive included
• Eight Cable Routing Clips
Compatible HydraPort Modules and Panels
Please refer to the Architectural Connectivity product page at www.amx.com for a
complete listing of compatible HydraPort Connection Modules
Installation of the HydraPort Base Assembly
The following sections describe the preparation, installation and setup of the HPX-600/
900/1200 HydraPort Base Assembly. A typical installation will include several various
HydraPort modules.
Note: Refer to www.amx.com for a complete listing of compatible HydraPort Connection
Modules.
Each HydraPort module has specific instructions for terminating their connections.
Refer to each Module’s Installation Guide during the installation of the HydraPort
system.
Note: Read these instructions in their entirety before beginning the installation. The
installation requires specific steps to be performed in specific order.
CAUTION: This installation requires specific woodworking skills. This installation should
be performed by an experienced person, comfortable with these types of woodworking
operations. Improper installation may result in damage to the mounting surface. AMX is
not responsible for damage caused by improper installation.
1) Select a Suitable Location for the HydraPort Base Assembly
The following table indicates the space requirements for installing the HydraPort Base
Assembly:
• The HydraPort system requires a mounting surface from 0.5” (13mm) to 2”
(51mm) thick. Thin surfaces may require spacers.
Note: Care should also be taken to ensure that the HydraPort system does not interfere
with the normal use of the work space. For example, on a table or work surface, ensure
that the system does not interfere with the user's legs when they are seated at the table.
2) Cut the Hole In the Mounting Surface
The Hydraport Base Assembly comes with a paper template that can be used to locate
the perfect spot and to mark the perimeter for cutting the table surface. The following
table provides the hole cutout dimensions for the HydraPort Base Assembly:
1. Use the template or measure the tabletop or other mounting surface to locate the
desired position of the HydraPort Base Assembly.
2. Use the cutout template to mark the edges of the cutout.
Note: Very little clearance exists between the HydraPort Base Assembly and the
hole cutout in the mounting surface.
• Align the cutout carefully with the edges or other features of the mounting surface.
If the cutout is misaligned, the installed unit will be misaligned.
• Take care to ensure that the top surface of the mounting surface is not damaged
beyond the width of the trim bezel as the cutout is made.
• Use an appropriate drill and drill bit to make a starting hole within the boundary
of the cutout. Use an appropriate saw, such as a jigsaw to finish the cutout.
• Make sure cutting tool used is appropriate for the material to be cut and will not
tear or chip the top surface.
• Note that the process of making the cutout will create substantial dust and
prepare the environment appropriately.
3) Prepare the Terminations
Some modules included in the final system require some type of backside termination.
Note: Refer to the installation guide for each module to determine the required backside
termination.
• The backside termination for each module can and should be completed before
the module is installed into HydraPort Base Assembly.
FIG. 1
HPX-600/900/1200 HYDRAPORT BASE ASSEMBLY
HPX-600/900/1200 HYDRAPORT BASE ASSEMBLIES
HPX-600-BL FG560-01-BL HydraPort Base Assembly, 6M Capacity, Black Trim
HPX-600-SL FG560-01-SL HydraPort Base Assembly, 6M Capacity, Silver Trim
HPX-900-BL FG560-02-BL HydraPort Base Assembly, 9M Capacity, Black Trim
HPX-900-SL FG560-02-SL HydraPort Base Assembly, 9M Capacity, Silver Trim
HPX-1200-BL FG560-03-BL HydraPort Base Assembly, 12M Capacity, Black Trim
HPX-1200-SL FG560-03-SL HydraPort Base Assembly, 12M Capacity, Silver Trim
MODEL HEIGHT WIDTH LENGTH
HPX-600 (Up to 6 Modules) Total Height
4.37” (111 mm)
With RCMs
11.3” (287 mm)
5.43” (138 mm) 8.19” (208 mm)
HPX-900 (Up to 9 Modules) 5.43” (138 mm) 11.14” (283 mm)
HPX-1200 (Up to 12 Modules) 5.43” (138 mm) 14.09” (358 mm)
MODEL WIDTH LENGTH
HPX-600 (Up to 6 Modules) 4.84” (123 mm) 7.64 (194 mm)
HPX-900 (Up to 9 Modules) 4.84” (123 mm) 10.59 (269 mm)
HPX-1200 (Up to 12 Modules) 4.84” (123 mm) 13.54 (344 mm)
FIG. 2 INSERTING THE MODULES INTO THE ASSEMBLY
Interlocking tab
Cables
HydraPort Base Assembly
Mounting Surface
End Cap
Table cut out
Specyfikacje produktu
| Marka: | AMX |
| Kategoria: | Niesklasyfikowane |
| Model: | HPX-900 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z AMX HPX-900, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane AMX
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
7 Grudnia 2024
8 Października 2024
8 Października 2024
2 Października 2024
2 Października 2024
Instrukcje Niesklasyfikowane
- Glock
- EBS
- EKO
- RME
- Ondis24
- Think Tank
- Atdec
- Naim
- Panamax
- Muama
- Thetford
- Cre8audio
- Blaupunkt
- K&M
- Pelgrim
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025