Instrukcja obsługi AMX VARIA-150

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX VARIA-150 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 43 osób i została oceniona przez 9 użytkowników na średnio 4.1 gwiazdek

QUICK START GUIDE

VARIA-15015.6” Touch Panel

VARIA-150N 15.6” Touch Panel (No-Comm)

Overview

AMX VARIA-150 (AMX-UTP1511) & VARIA-150N(AMX-UTP1511N) are15.6”

professional-grade touch panels designed to adapt to the unique needs of your

environment by offering a selection of personas. Varia personas are pre-loaded

apps that define the entire panel experience.

Microphones

(except No-Comm)

Settings Button

Function Button

Side LED LAN/POE

USB

Speakers

FIG. 1AMXVARIA-150 Touch Panel

Product Specifications

VARIA-150 SPECIFICATIONS

Dimensions (HWD)

TBD

Weight

TBD

Power Consumption

PoE, 802.3at, 30watt

External Power

Supply Required

Optimal performance requires use of the following

AMX PoE power supply (not included):

•PS-POE-AT-TC, PoE Injector, 802.3at

Compliant (FG423-84)

Certifications &

Compliance

•UL

•CE

•CB

•FCC Class B (-5dB)

Environmental

Operating Temperature

•0°C - 40° C (32°F – 104°F)

•5% - 85% Humidity

Storage Temperature

•-20°C – 60° C (4°F – 140°F)

•

5% - 90% Humidity

Included Accessories

•Mounting Plate

•Adhesive Pad

•Set Screw

•Installation Template

VARIA-150 Installation

Variacan be surface-mounted onto a wall, glass or other smooth surface, or

connect to any number of popular VESA mountswith the included mounting

bracket & hardware.

The VARIA-150 converts to atabletop touch panel when used in conjunction with

a tabletop stand accessory (sold separately).

TABLETOP STAND ACCESSORIES

VARIA-ACS-150A

(AMX-UMT-1511)

AMX Varia Angle-Select Tabletop Stand

for VARIA-150 & VARIA-150N

Power Over Ethernet

Poweris supplied via Power Over Ethernet (PoE), utilizing an AMXcertified PoE

injector such as the PS-POE-AF-TC PoE Injector (FG423-83)or compatible

network switchwhich is classified as ES1 and PS2 output in accordance with

IEC/EN/UL 62368-1. Connect the incoming Ethernet cable to the RJ-45 port on

the VARIA-150.

Mounting Plate

The included mounting plate containsa 100x100 VESA hole pattern,set screw,

anddedicated area for the included adhesive pad.

Set Screw

Adhesive Pad 100x100 VESA

FIG. 2Mounting Plate

STEP 1: Installation Prerequisites

Prior to touch panel installation, identify a proper installation surfacein

accordance with local laws and building codes.Ensure that your category cable

(networking cable) has access to the location.

STEP 2: Install the Mounting Plate

If installing on wall, mark your surface using the included installation template

forthe four (4) VESA holes and one(1) desired cable pass-thru location. Drill

holes as required and screw the mounting bracketonto the surface, using

appropriate hardware for the surface (ie. drywall, concrete, brick, etc.).

If installing on glass or other smooth surfaceusing the adhesive pad, first apply

the adhesive pad to the mounting bracket, only exposing oneside of the pad.

Then adhere the mounting bracket to the surfacewith the set screw hole facing

UP and the two tabs on the BOTTOM. Make sure it is a secure fit, but do not

apply too much pressure asglass may break.

STEP 3: Route Category Cable

Remove the touch panel’s lower rearcover by removing two (2) screws and then

sliding the cover off. Pressthe rectangularholes to push the coveraway from

you.

FIG. 3Lower Cover Holes

Plug in the networking cable and route it out one (1)of the three (3) available

openings in the lower cover: left, right, or bottom.Once fully seated, reattach

the lower rear cover.

Screw Location

Screw Location

Specyfikacje produktu