Instrukcja obsługi Cotech 36-7304


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech 36-7304 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 10.5 użytkowników na średnio 4.3 gwiazdek

Strona 1/5
GREAT BRITAIN CUSTOMER SERVICE
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mail internet postal
Ver. 20180509
LED Ceiling Light
Art.no 36-6774, 36-6775, 36-7304
Please read theentire instruction manual before using theproduct and then save it
for future reference. We reserve theright for any errors in text or images and any
necessary changes made to technical data. In theevent of technical problems or
other queries, please contact our Customer Services.
Safety
The light source of this lighttting is not replaceable. When the light source
reaches the end of its life the whole light fitting must be replaced.
This lighttting is only suitable for permanent installation and should be
installed by aqualified electrician.
Thelight fitting should be mounted out of thereach of children.
Ensure proper footing and balance at all times during installation.
Make sure that there are no hidden cables or water pipes in theceiling
before drilling/screwing.
Warning: Whenever installing any electrical products, basic safety
precautions should always be observed to avoid therisk of fire, electric
shock and personal injury.
36-6774 36-6775, 36-7304 Care and maintenance
Use adry cloth to wipe thelighttting clean.
Thelamps are non-replaceable. Never try to open thehousing or modify
thefitting in any way.
Responsible disposal
1. Warning: Before beginning any electrical installation
always disconnect thepower to thecircuit you are
working on, either by turning off themain circuit breaker
or by removing thefuse from theconsumer unit.
3. Loosen theside panel that you plan to connect theelectrical lead to.
Note: Thecable gland plug (circled in theimage) should be removed on
theside theelectrical cable is to be connected to. Leave theseal plug in to
maintain thetightness of theseal, if no cable is to be connected through
theend of thelighttting.
4. Loosen thecable gland nut, pass theconduit through it and connect its wires
to theterminal block. Thelight fitting is double-insulated and does not Note:
have anearthed terminal.
5. Screw theside panel back on.
7. Press thelighttting up into
thehanging brackets until it clicks
into place.
6. Tighten thecable gland nut.
8. Turn thepower on.
Use thesame installation procedures described above for connecting several
light fittings in series (36-6775, 36-7304: Max 10, 36-6774: Max 21).
Cable diam: 5.5−10 mm.
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout theentire
EU. In order to prevent any harm to theenvironment or health
hazards caused by incorrect waste disposal, theproduct must be
handed in for recycling so that thematerial can be disposed of in
aresponsible manner. When recycling your product, take it to your
local collection facility or contact theplace of purchase. They will
ensure that theproduct is disposed of in anenvironmentally sound
manner.
Specifications
36-6774
Rated voltage 220–240 V AC, 50/60 Hz
Light source 1600 lm, 3000 K, 16 W
Length 570 mm
Width 69 mm
Operating temperature −30 to 40 °C
IP rating IP66
36-6775
Rated voltage 220–240 V AC, 50/60 Hz
Light source 4000 lm, 3000 K, 40 W
Length 1170 mm
Width 69 mm
Operating temperature −30 to 40 °C
IP rating IP66
36-7304
Rated voltage 220–240 V AC, 50/60 Hz
Light source 4000 lm, 4000 K, 40 W
Length 1170 mm
Width 69 mm
Operating temperature −30 to 40 °C
IP rating IP66
Double insulated.
This light is not suitable for use with a dimmer or electronic switch.
Installation
2. Secure thelighttting’s
mounting brackets to
theceiling with screws.
Use fasteners suitable
for thesurface material
and ensure that there
are no electrical wires
or water pipes in
theceiling where you
intend to drill/screw.


Specyfikacje produktu

Marka: Cotech
Kategoria: Niesklasyfikowane
Model: 36-7304

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cotech 36-7304, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Cotech

Cotech

Cotech 36-7304 Instrukcja

1 Września 2024
Cotech

Cotech RH01-E-1 Instrukcja

31 Sierpnia 2024
Cotech

Cotech S1J-XT9-10 Instrukcja

31 Sierpnia 2024
Cotech

Cotech 30-9286 Instrukcja

31 Sierpnia 2024
Cotech

Cotech S1J-AJ8-10 Instrukcja

31 Sierpnia 2024
Cotech

Cotech 52008x36 Instrukcja

30 Sierpnia 2024
Cotech

Cotech 36-8011 Instrukcja

29 Sierpnia 2024
Cotech

Cotech JSRF-601F Instrukcja

28 Sierpnia 2024
Cotech

Cotech EMT769A Instrukcja

28 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025