Instrukcja obsługi Cotech S1J-AJ8-10
Cotech
Niesklasyfikowane
S1J-AJ8-10
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech S1J-AJ8-10 (24 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.4 gwiazdek
Strona 1/24
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen och spara den för
framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Gravyrpenna
Graverpenn
Kaiverruskynä
Art.no Model
18-3028 S1J-AJ8-10-UK
30-9128 S1J-AJ8-10
ENGLISHSVENSKANORSKSUOMI
Engraving Tool
Ver. 200802
2
ENGLISH
Engraving Tool
Art.no: 18-3028 Model: S1J-AJ8-10-UK
30-9128 S1J-AJ8-10
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photographic errors and any changes in technical
data. If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse.)
Safety Warnings Common for grinding,
sanding, wire brushing, polishing or abrasive
cutting-off operations
a) This power tool is intended to function as a grinder, sander, wire brush
or cut-off tool. Read all safety warnings, instructions, illustrations
and specications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, re and/or serious injury.
b) Operations such as polishing are not recommended to be performed with
this power tool. Operations for which the power tool was not designed may
create a hazard and cause personal injury.
c) Do not use accessories which are not specically designed and
recommended by the tool manufacturer. Just because the accessory can
be attached to your power tool, it does not assure safe operation.
d) The rated speed of the accessory must be at least equal to the maximum
speed marked on the power tool. accessories running faster than their rated
speed can break and y apart.
e) The outside diameter and the thickness of your accessory must be within
the capacity rating of your power tool. Incorrectly sized accessories cannot
be adequately guarded or controlled.
f) The arbour size of wheels, anges, backing pads or any other accessory
must properly t the spindle of the power tool. Accessories with arbour
holes that do not match the mounting hardware of the power tool will run out of
balance, vibrate excessively and may cause loss of control.
g) Do not use a damaged accessory. Before each use inspect the accessory
such as abrasive wheels for chips and cracks, backing pad for cracks,
tear or excess wear, wire brush for loose or cracked wires. If the power
tool or accessory is dropped, inspect for damage or install an undamaged
accessory. After inspecting and installing an accessory, position yourself and
bystanders away from the plane of the rotating accessory and run the power
3
ENGLISH
tool at maximum no-load speed for one minute. Damaged accessories will
normally break apart during this test time.
h) Wear personal protective equipment. Depending on application, use face
shield, safety goggles or safety glasses. As appropriate, wear dust mask,
hearing protectors, gloves and workshop apron capable of stopping
small abrasive or workpiece fragments. The eye protection must be capable
of stopping ying debris generated by various operations . The dust mask or
respirator must be capable of ltrating particles generated by your operation.
Prolonged exposure to high intensity noise may cause hearing loss.
i) Keep bystanders a safe distance away from work area. Anyone entering
the work area must wear personal protective equipment. Fragments of
workpiece or of a broken accessory may y away and cause injury beyond the
immediate area of operation.
j) Hold power tool by insulated gripping surfaces only, when performing an
operation where the cutting accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and shock the operator.
k) Position the cord clear of the spinning accessory. If you lose control, the
cord may be cut or snagged and your hand or arm may be pulled into the
spinning accessory.
l) Never lay the power tool down until the accessory has come to a
complete stop. The spinning accessory may grab the surface and pull the
power tool out of your control.
m) Do not run the power tool while carrying it at your side. Accidental contact
with the spinning accessory could snag your clothing, pulling the accessory
into your body.
n) Regularly clean the power tool’s air vents. The motor’s fan will draw the
dust inside the housing and excessive accumulation of powdered metal may
cause electrical hazards.
o) Do not operate the power tool near ammable materials.
Sparks could
ignite these materials.
p) Do not use accessories that require liquid coolants. Using water or other
liquid coolants may result in electrocution or shock.
Specyfikacje produktu
| Marka: | Cotech |
| Kategoria: | Niesklasyfikowane |
| Model: | S1J-AJ8-10 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Cotech S1J-AJ8-10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Cotech
1 Września 2024
31 Sierpnia 2024
31 Sierpnia 2024
31 Sierpnia 2024
31 Sierpnia 2024
30 Sierpnia 2024
30 Sierpnia 2024
29 Sierpnia 2024
28 Sierpnia 2024
28 Sierpnia 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane My Arcade
- Niesklasyfikowane SPC
- Niesklasyfikowane Lionelo
- Niesklasyfikowane Gigabyte
- Niesklasyfikowane BabyGO
- Niesklasyfikowane Hombli
- Niesklasyfikowane ABC Design
- Niesklasyfikowane Leatt
- Niesklasyfikowane Meinl
- Niesklasyfikowane Berger & Schröter
- Niesklasyfikowane Radiant
- Niesklasyfikowane G3 Ferrari
- Niesklasyfikowane RCA
- Niesklasyfikowane Coleman
- Niesklasyfikowane Gitzo
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025