Instrukcja obsługi Nitecore RSW2i WL
                    Nitecore
                    
                    Niesklasyfikowane
                    
                    RSW2i WL
                
                                
    Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore RSW2i WL (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 5.0 gwiazdek
                        Strona 1/2
                    
                    
                    
Operation Instructions
Connect / Disconnect the Wireless Remote Switch
(The pairing between the Wireless Tailcap and the Wireless 
Remote Switch is preset in the factory.)
As illustrated, unscrew the original tailcap of the ashlight and 
replace it with the Wireless Tailcap. After inserting the battery 
and tightening the Wireless Tailcap, 
half press the Wireless Tailcap 3 
times, the indicator on the tailcap 
will fade in and out, informing the 
user that the Wireless Remote 
Switch has been connected with 
the ashlight. After connecting, half 
press the Wireless Tailcap 3 times 
again, the Wireless Remote Switch 
will be disconnected.
Note:
1. The maximum signal range between the Wireless Tailcap and 
the Wireless Remote Switch is 1m (3.28ft) when there are no 
obstacles blocking the path.
2. The Wireless Remote Switch is powered by 1 x 3V CR1632 
button cell battery which enables approx. 4,000 presses. 
The standby time is approx. 12 months for a new battery. To 
replace the button cell battery, remove the battery cap of the 
Wireless Remote Switch with a screwdriver or a key. 
3. Fully tighten the Wireless Tailcap to the ashlight tube. 
The ashlight or the Wireless Remote Switch will not work 
properly otherwise.
Using Wireless Remote Switch
On / O
On: When the light is o, full press the 
Button A to turn it on.
O: When the light is on, full press the 
Button A or the Button B to turn it o.
Brightness Level Adjustment
When the light is on, half press the Button 
A to adjust the brightness levels.
Tactical Momentary Illumination
When the light is o, press and hold the Button B to access 
TURBO Mode. Release to turn it o.
Special Modes
When the light is on, full press and hold the Button A to access 
STROBE Mode. Release to keep STROBE Mode.
When the light is o, full press and hold the Button A to access 
STROBE Mode. Release to turn it o.
Note: The Tactical Momentary Illumination and Special Modes 
are only available for P10i, P20i, P20i UV Tactical Mode, P10iX 
Tactical Mode, P20iX Tactical Mode
Pairing Instructions 
The pairing between the Wireless Tailcap and the Wireless 
Remote Switch is preset in the factory. Please follow the steps 
below if you need to re-pair them. 
1. After inserting the battery and tightening the Wireless 
Tailcap, half press the Wireless Tailcap 5 times, the indicator 
on the Wireless Tailcap will ash quickly to indicate the 
access to the pair pending status.
2. After accessing the pair pending status, press both Button 
A and Button B of the Wireless Remote Switch until the 
ashlight becomes steadily turned on.
Note:
1. After accessing the pair pending status, the ashlight will 
return to the standby status if it fails to be paired within 5 
minutes.
2. If the ashlight is turned on after accessing the pair pending 
status, it will automatically exit the status.
3. Make sure the distance between the ashlight and the 
Wireless Remote Switch is within 1m during the pairing 
process.
4. Replace or recharge the battery when the battery power of 
the ashlight is low. Changing the battery does not remove 
the pairing between the ashlight and the Wireless Remote 
Switch. 
WARNING
THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed, a lithium button battery can cause severe or 
fatal injuries within 2 hours.
Keep batteries out of reach of children.
If you think batteries may have been swallowed or placed 
inside any part of the body, seek immediate medical attention.
Warranty Service
All NITECORE® products are warranted for quality. Any DOA / 
defective product can be exchanged for a replacement through 
a local distributor/dealer within 15 days of purchase. After 
that, all defective / malfunctioning NITECORE
®
 products can 
be repaired free of charge within 12 months from the date 
of purchase. Beyond 12 months, a limited warranty applies, 
covering the cost of labor and maintenance, but not the cost of 
accessories or replacement parts.
The warranty will be nullied if
1.  the product(s) is/are broken down, reconstructed and/or 
modied by unauthorized parties.
2.  the product(s) is/are damaged due to improper use. (e.g. 
reversed polarity installation)
3.  the product(s) is/are damaged due to battery leakage.
For the latest information on NITECORE
® products and services, 
please contact a local NITECORE
® distributor or send an email 
to service@nitecore.com
※ All images, text and statements specied herein this 
user manual are for reference purpose only. Should any 
discrepancy occur between this manual and information 
specied on www.nitecore.com, Sysmax Innovations Co., 
Ltd. reserves the rights to interpret and amend the content 
of this document at any time without prior notice.
SYSMAX Innovations Co., Ltd.
TEL:  +86-20-83862000
FAX:  +86-20-83882723
E-mail:  info@nitecore.com
Web:  www.nitecore.com
Address:  Unit 6355, 5/F, No. 1021 Gaopu Road, 
  Tianhe District, Guangzhou, 
  510653, Guangdong, China
Thanks for purchasing NITECORE!
Please nd us on facebook : NITECORE Flashlight
Made in China
RSW13072iWL22
RSW2i WL User Manual
The RSW2i WL Wireless Remote Switch is for wireless control of 
NITECORE i Series ashlights.
Specifications
Compatible With: P10i, P10iX, P20i, P20i UV, P20iX, P30i, P35i
Package Contents: 
Hook-and-loop Straps x 2Hook-and-loop Fastener
Wireless Remote SwitchWireless Tailcap
Picatinny Rail Mounts x 2 
(optional) 
Specyfikacje produktu
| Marka: | Nitecore | 
| Kategoria: | Niesklasyfikowane | 
| Model: | RSW2i WL | 
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Nitecore RSW2i WL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Nitecore
                        
                         4 Grudnia 2024
                        
                    
                                                            
                        
                         4 Grudnia 2024
                        
                    
                                                            
                        
                         4 Grudnia 2024
                        
                    
                                                            
                        
                         4 Grudnia 2024
                        
                    
                                                            
                        
                         29 Września 2024
                        
                    
                                                            
                        
                         29 Września 2024
                        
                    
                                                            
                        
                         26 Września 2024
                        
                    
                                                            
                        
                         16 Września 2024
                        
                    
                                                            
                        
                         13 Września 2024
                        
                    
                                                            
                        
                         11 Września 2024
                        
                    
                                                            Instrukcje Niesklasyfikowane
- Ulsonix
- Prologue
- Rocstor
- Full Boar
- Corel
- Cropico
- Firefriend
- Zenec
- Livarno
- EcoFlow
- Dr. Browns
- Choice
- Draytek
- Mircom
- Davis
Najnowsze instrukcje dla Niesklasyfikowane
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025
                        
                    
                                                            
                        
                         29 Stycznia 2025